All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Execute scripts on WiFi/network connect or disconnect; monitor adapter, store status in a variable and trigger custom scripts for headless SBC...
Featured
Left phone recording captures unexpected footage worth reviewing
question
Ideas To Attach A Tablet To Ezr Pan/Tilt Servos
I would like to add Pan/Tilt to a Tablet to be the Robot Interface besides the rotation & lever servo i will need:...
32
7 k
rgordon |
question
Ezb-V4
Hello, I have an EZB-V4 Wifi Robot Controller that I have not set up yet and every time I go through the wifi settings and try to save new settings it tells me: "Cycle power to initialize new settings" How would I cycle the power? I cannot seem to find an answer through any other forum on EZ Robot.com I know there must be something small...
2
2 k
Cameron |
question
Capture Photos From Camera Stream
Kindly I am having an inquiry about how to use the Camera.GetCurrentBitmap to get the current frame that is shown by a camera device on a PictureBox Control in a C# Form? When I use the C# code to access the current frame from camera stream, to get a captured image, It always give me a NullReferenceException that the Bitmap Object that is returned...
4
2 k
DJ Sures |
question
Compaq/Hp Wifi Connection Questions
This thread is no longer used.
64
17 k
Dave Schulpius |
question
Regulator Designs? 40V Drop 18V And At Least 15 Amps
Hello All, I am thinking this may be a custom build but I will poke around for help. I need to drop the 40 volts from the main drive batteries to usable voltage for the Sabertooth 2x12a motor controller and also the EZB itself of course. Since these run power to the drive motors I need at least 15 amps of current and I would like to have a buffer...
9
5 k
Dave Schulpius |
question
How Could I Use Ez Face Detection In My Vs Application
Hello everyone especially @ptp, I need to know how to use the ez face detection method in my vs app i try this...
8
3 k
shaimaabes |
question
Help Me Find A Link To Previous Thread
Hey guys, sorry I've been busy, and on occasion I get a minute to check ezrobot. One day I saw a list i believe DJ put together of some links to some cheap tablets ?! I didn't get a chance to bookmark. Could anyone send me that link again. Thanks.
2
2 k
fxrtst |
question
Face Recognition Working On ARC
Here is face recognition working on ARC shown by Mike our lead programmer.
90
14 k
thetechguru |
robot
Justinfinley04's I Want To Make A Robot That Ha
Compact 4-6 inch cube drone with four circular propellers, four onboard sensors, camera and computer for autonomous following and voice control
0
2 k
Justinfinley04 |
question
Continues Read Of Ir Sensor
Im a little confused here. I'm simply trying to read the value coming from my IR sensor (one of the Sharp IR ones). The script I wrote should should be a simple loop and display the value, can continue to display the value until I tell it to stop. goto(sensor) :sensor $IRSensor = GetADC(ADC4) # Sharp IR Sensor print($IRSensor) sleep(1000) Return()...
10
4 k
RoboHappy |
question
Init Start
in the init i can see the servo's d1 and d0 are set slower. i try to ad servo id d2 and d3/d7/d4 but they dont slow down. when jd goes in to calibrate postion it go's so almost violently fast. can this be changed ? thanks anyone
3
3 k
Nomad 6R |
blog
EZ-Robot Inventor Builds A $50,000 Scarlett Johansson Robot
Ricky Ma built a robot version of Scarlett Johansson, spending over $50,000 and 18 months to complete...
0
646