All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
USB control for Pololu Maestro (6/12/18/24) via ARC Vx ports. Maps Vx to Maestro channels; supports position, speed, acceleration, release.
Featured
Conversational AIML robot that answers questions with servo-driven eyes and mouth, DF Robot Hexa Base Rotate head, Arduino running DJ's firmware
question
Wii Controller Not Working Consistently On Windows 10
Hello, I'm having a lot of difficulty getting the Wii controller to work consistently on Windows 10. I've...
3
3 k
DJ Sures |
question
Robot Building Safety?
This is just a quick little PSA (public service announcement) I hope this will be ok to post here? Always practice safety when building your robot, be it the shop tools you...
2
2 k
RoboHappy |
robot
Knusel's Johnny 5 Hannover
Johnny 5 from Short Circuit-inspired robot project showing steady progress with build photos of ongoing development
4
4 k
DJ Sures |
question
Robot Jerking Servos
I added a pan/tilt system to my robot to track objects but the servos just jerk around randomly. Help? I'm using some Tower Pro servos I had lying around.
3
2 k
DJ Sures |
question
Camera Movement Control
Hi All! My son and I built this robot with a mix of parts, hot glue and some fun. It has two motors connected to the ioTiny through an hbridge. The ez robot camera moves...
8
2 k
ggr_scott |
robot
Rb550f's Ez Robot Attacknid 6Lr
Attacknid robot with EZB V3: 18-inch walker with 12V lithium, dual H-bridge drive, sound/LED mic, 12-inch LED fan, under $100
10
8 k
David mcsdaver |
question
Reading And Writing Files In Java
I am not a Java expert. Can someone post an example of how to open/write and open/read a file on my local computer using the ARC Java Script editor?...
5
2 k
dbeard |
feature request
On/Off For Speech Recognition Phrases
Toggle phrases in speech recognition engines to enable or disable specific voice commands for improved recognition control.
5
2 k
RoboHappy |
robot
Ezang's Mr. Metal Robot 2020
Synthiam ARC controlled Talking Mr. Metal robot with EZ-B4, 2 IO Tinys, RGB eyes, ServoCity gears and DFRobot hex base rotation.
10
3 k
EzAng |
question
What Is The I2C Address For The Iotiny.
I know the address for I2C port on the EZB v4 is 0x09, is it the same for the IOtiny? I found the pin out documentation but no port address.
2
2 k
DJ Sures |
question
Question For Power Supply Requirement
Hey guys, I am looking into how to build a bigger servo actuator at the moment... Its nothing like a full blown project at the moment, I am just...
9
2 k
fxrtst |
question
Speech Recognition Screen Popping Up.
So I have been tinkering with speech recognition and enjoying it. Recently after a speech interaction completes I get this pop up screen with a...
7
2 k
TimothyDrake |