Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Telnet-like ASCII TCP client for ARC: connect to IP:port, send ASCII, view raw or HEX server responses with local echo
Featured
Baxter JD clone using EZ-B4/ioTiny and AX-12 servos - performs JD actions; includes power, servo mapping, USB2DYNAMIXEL and gear tips.
question
R2d2 Builders!
R2D2 builders! I am looking for a R2D2 toy under 2 feet tall. What toy have you used? Please reply!
1
2 k
hoolagen1 |
question
High Power Servo
Hi All. I understand that this servo does best with 6V. https://www.hobbyking.com/hobbyking/store/__8496__Turnigy_S8166M_Servo_154g_33kg_21sec.html Can I simply connect the + and - wires from another power source to the servo, and connect the white wire to the EZ-b, or is something more complicated (like a voltage booster) needed? thanks in...
12
4 k
ftlum |
question
Live Stream And Android Using Ez-B
Hello everyone I'm currently in the development of a development of a robot, that uses EZ-B microcontroler and camera, I would like to implement an Android Application that would display the live stream from the bluetooth camera into the android device, and as well be able to manipulate the robot through Application, I would like to know if this is...
5
2 k
DJ Sures |
question
L298 Question
I'm having a weird issue with the L298 and the movement panel in ARC. I connected the L298 as explained in the tutorial section. With these exceptions: I used jumpers instead of solder for most...
4
2 k
McJeff0125 |
question
Maximum Voltage/Voltages For The Ez-B?
Hello. Currently in my robotics project, I am using a lot of electronic components such as leds that are eating up my batteries instantly. I am thinking about using a power adapter to keep the current running to all of my electronics. Is there a maximum voltage other than 9 volts to maintain a strong, on-going current to fuel my project, and if so,...
5
2 k
Dave Schulpius |
question
Digital Inline Multimeter
@DJSures Hey DJ I've seen a number of videos with you using a small square inline digital multi meter. Where did you get it from? I have been looking for something...
7
5 k
Tameion |
question
Attaching An Led To A Digital Port?
What is the best way to attach an LED as an indicator on a digital port? I tried by connecting an LED with a 330 ohm resistor to the GND and signal pins, and this works, but I just wondered if this should best be done with external power (I plan to add several of these) or off of the EZ-Robot board? I will be running off of a battery once I get...
5
2 k
RoboticsMaster |
question
Very Cool Robot From Robotshop
this is a very cool little robot for under $100 for massages I going to get one for my older sister thats a professional masaage therarapist
13
3 k
robotmaker |
question
Powerfull Robot .Safety Features
At present I am working on a Motorised Wheelchair Base unit using the original Motors,these are pretty powerful and can inflict a lot of damage if great...
13
4 k
Danger! |
question
Wall-E Led
How did DJ connect wall-e's led for his eye to the ez-b?
23
6 k
Rich |
question
Looking To Sell A Upgrade Kit For The Roomba 4000 Series Robot
lot of are using a roomba 400 series with EZB and its a great platform for any type of robot...
22
4 k
robotmaker |
question
Motor Driver
Hi! well i am working on a robot using the rear end of those kids cars they drive around in. the motors are 12 volt,does your motor driver handle 12 volt external power 4 ah.please help!
0
2 k
kevintutor74 |