Profile Picture

mtiberia

Country: Canada
Member Since:

Achievements

  • 2013-01-05 - joined Synthiam
  • 2013-01-23 - created first new question
  • 2014-10-02 - joined your first forum discussion
  • 2014-10-02 - attempted to help a fellow robot builder
  • 2014-10-19 - shared your first photo in the forum
  • 2014-10-28 - shared your first video in the forum
  • 2015-02-05 - answered a forum question
  • 2015-04-12 - connected ARC to the cloud

Latest submissions

question

Nasa 2015 Sample Return Challenge This Week

Anyone that may be interested the 2015 Nasa sample return challenge starts this week with the level one this Wednesday. Robots have to search and find items autonomously in a large park by WPI University. Ive been busy building trying to build a rover under the rules of the competition, almost done , and will be using EZ B and some Python scripting...
question

Removing The Prompt Everytime I Close ARC

I have an ebbed computer running Windows 8, that has to shut down gracefully when the power is switched off. I have a script written but ARC wont allow a shutdown unless you click No . Which is a problem with no keyboard, monitor etc. Tried to Google it but am having no luck. Thanks
question
Question Regarding The Speed Of The Repeat Funtion In Ez-Script

Question Regarding The Speed Of The Repeat Funtion In Ez-Script

I find that when using the Repeat function in EZ-Script it takes a long time to loop through...
question
Dj A Feature Request For  Lidar-Lite Laser

Dj A Feature Request For Lidar-Lite Laser

Hello DJ Im using the LIDAR-Lite Laser Rangefinder by PulsedLight in my project and would like to know if you can add support for it in...
question

Small Feature Request Dj ; Having Ez-Script Accessing The Computer Com Ports

Would you be able to add a feature to EZ-Script so that the computers Com ports could be used for serial communication ? It would add one more great feature to EZ-Script. Regards
question
Ezb Can Figure Out What Side Sound Is Coming From

Ezb Can Figure Out What Side Sound Is Coming From

I used two DFB Robot sound sensors to give EZB sound localization. These are analog sensors and I tweaked the RX analog...
question

Demonstration Learning Thanks To Ez-Script

Since DJ has fixed the bug with the UART, thanks again DJ, I was able to use EZ-B to write a script showing how you can program a motion for your robot through demonstration . There are a few people out there experimenting with this method of programming their robots . One interesting example uses something called goal babbling , where the...
question

Dynamixel Ax-12 Servo

Would I be able to control the Dynamixel AX-12 servo with the ez-B.
question
Little Bit Of Inspiration

Little Bit Of Inspiration

This you tube video got me back into robotics. https://www.youtube.com/watch?v=319eVBIYfec
question

New Robot Kit Being Released Today By Meccano

Maybe DJ can set up the motion capture with EZ-B. Take a look at this video. https://www.youtube.com/watch?v=Q03nIupGAIQ
question

Dynamixel Control Question

Ive been using a different controller and python to control my dynamixel servos. I really want to use the EZb and its software so I connected everything up to my EZb and just wanted to use the basic scripting to control the servos. Found a couple of issues that may cause DJ some headaches when he wants to add more controls to take advantage of the...
question
Getting Ezb Camera Feed Using Opencv And Python

Getting Ezb Camera Feed Using Opencv And Python

Just an example showing how to get the EZB camera feed using Opencv and python. EZ builder has a greta setup but for those who...
question
Great Uart Can Now Rx 0 To 255 But

Great Uart Can Now Rx 0 To 255 But

Thanks DJ can now RX all integers from 0 to 255. The only issue remaining is TX 34,40 and 92. Thanks
question
Stop Motion Animation

Stop Motion Animation

Hello DJ Im reading the positions of the dynamixel servos and saving them to a file. I set a pose on my robot then save and the set another pose and so on, Same technique that...
question
Uart Update Success And Then A Tiny Little Bug Showed Up

Uart Update Success And Then A Tiny Little Bug Showed Up

Ive been successful with communicating with the Dynamixel servos through the UART port. Im able to send...
question
Uart Question When Tx And Receiving Unsigned Chr

Uart Question When Tx And Receiving Unsigned Chr

There is an issue when sending ASCII code through the UART ports. For some reason the ASCII code is getting lost in the...
question

Communicating With A Dynamixel Servo

Today is the first time I really had a chance to play with the EZB-4. Ive connected a Dynamixel servos and had mixed results. The resolution is 0 to 170 but the servos are unresponsive from 81 to 89 for some reason. I tried communicating with the servos with EZ script using UART 2 with no luck. Im using the communication protocol for the servos....
question
Still Waiting

Still Waiting

Still waiting for my order , 2-4426. Cant play if I dont have the toys! Regards
question

Append And Define Array Examples Are Showing Syntax Errors Again

This is the same issue that was resolved a few months back. I have the newest version of ARC. Even the examples I wrote and saved in my project files crash now, very frustrating.
question

Dynamixel Commands

Will ARC include all the commands that can be sent and data received from the AX-12 servo? Regards
question

V4 Specs/Power Supply

Hello DJ I already have a 12 V power supply that Im using with my dynamixels. Will I be able to hook up the V4 to it ? Will you be providing spec sheets for the V4. Regards
question

Camera Imaging

Hello DJ Do you use Opencv for your vision software?
question

Contolling The Bioloid Cm-5 Controller

How can I use the ez -B to send commands to the Bioloid CM-5 controller. Thanks
No general conversations. Click here to start a conversation.
No robot skills. Click here to view the Robot Skill Store.
No Synthiam robots. Click here to view the featured robot projects.
No live robot hacking sessions. Click here to view the past live robot hacks.
No user tutorials. Click here to view all user tutorials.
No robot apps. Click here to view all user robot apps.
No firmwares. Click here to view robot hardware and firmwares.
No 3D printable parts. Click here to view 3D printing robot library.
No features requests.