cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Confoundedhound's Modified Omnibot 2000
I am working on an old Omnibot 2000. It was in bad shape to begin with, so it didnt seem such a crime to give him a new...
Bhouston's My Inmoov Running On Synthiam
Initial test of my InMoov robot running on the new EZBv4. I have 24 servos connected to one v4 and all are running OK....
Cardboardhacker's Alex Cardboard Omnibot Twin
I decided I would start the ALeX project. This was going to be similar to aameraliss lexi 3000 v1, but I cant get into...
Ok I couldnt sleep tonight from kidney pain (i have a blocked kidney) and I was checking out the carry handles. I don't know if they are sturdy enough to handle the extra 15 pounds on a regular basis , so I filled the hollow cavities with fiberglass resin. Tommorow I will coat the handles in epoxy and fiberglass to thicken them slightly , also I will place a single layer of Matt on the backside of the handles where I filled the cavities tonight. I will post pics in the am. It's about time to mold in my iron man ARC reactor into the factory speaker location. I believe I will still put the speaker behind it though.
Awesome! Pics dude, pics.
@jstarne good to be back home to work on my robot projects,had a great time in china hopping to get my omnibot 2000 soon my first project since most of my parts are here is my roomba project ,then my brookstone rover hack since i think i have all parts for it now,many mant boxes of parts to unpack,my girlfriend did a good job holding them for me,so going out to a nice place to eat dinner with her
Ok I beefed up the handles , I will.sand these to get ready for paint. More.pics when I get the ARC reactor in.
have you check the instructables for ideas on the ARC design,many are on the site
@jstarne you making 2 different robots,one you hace a cd player and itx board ,OMNIBOT 2000 and another you have a ARC reator i guess where the missiles go in on the RAD
Ok I cut out a hole with a dremel carefully , I had to.cut.down this ARC reactor toy 1/4" on the edge so it would fit.
ok i see now,going to look great,looking at one day to make a iron man robot,but for now looking to first finish my irobot roomba project ,almost done and my rover project about 75% done a fter start on my omnibot 2000,kinda close to yours,not using a reactor or cd player,but does have alot more upgrades i have plan for as i wait for parts to come in one,i start on another,my irobot roomba will be about 4 feet tall