Hello EZ Robot! Meet Dusty, he is a omnibot torso and I currently have the choice of robbie at head or a omnibot done where you can see inside. He will handle a few basic functions and us made more simple than his big brother Jarvis.
- He can vacuum (which is loud) with power brush and impeller
- He can "sweep" nearly silent by running the power brush at a reduced voltage and a small DC blower providing low level auction. 3.dusty will have two germicidal bulbs ,.one facing downward to the floor and another behind intake fans that not only cool electronics but it pulls air through a Honeywell two stage carbon filter. 4.dusty has 4 build in filters foam pre filter , and 3 carbon filters.
- He will have a camera on pan tilt bracket. He will be controlled by Bluetooth or wifi.
- Long runtime , 2 x 12v 7ah batteries.
Any other suggestions guys?
]
By jstarne1
— Last update
Other robots from Synthiam community
Kenny's Aiwabot
Convert a Roomba Dirt Dog into a servo-armed robot with EZ-B, camera, multiple servos, regulators, grippers and OLED...
Andy's Lilian Is Assembled And Running
Lilian DIY robot with EZB v4: face/color tracking, voice-controlled drive, arm servos and grippers, MP3 replies; owner...
Ezang's ARC - A Short Video - My Tank Base Robot - DC...
Synthiam ARC controls a tank chassis with EZB IO Tiny and L298 H-Bridge PWM, with wiring and settings for forward,...
It wont be long I have the other Ezb on order from Dj so the sooner I get it the sooner Dusty will come alive.
Here is dusty as of right now...
Dusty with the 7 inch screen up front... i can use a wifi remote display viewer so there is still no need to have a pc inside
merne,Is your avatar of a robot built from an Elvis-Alive! ? Is it on a robot. If so, have you posted pix of it.
I think I like the idea of the screen there up front. I will need to install a thick screen protector to prevent any accidental bumps from cracking the screen. At this moment im thinking the radar will be mounted in the chest area. Batteries would be in the torso..
I got the bright idea I could make swinging arms on the sides of dusty to get closer to and possibly under the edge of. The bed or couch. The tip of the arm itself would need a sensor just to make sure it doesn't get snagged on anything. I think I would use a simple ir . It would only open when it senses a wall or object near but if it gets too close it closes.
Oops I posted this in a wrong post, sorry. Following many.
MovieMaker,
It's a combonation of ElvisAlive Mask, and A head from Rotbotsquared, I cut the lower jaw off and installed a moving mouth/teeth with servo. Removed the lower eye lids, then added the ElvisAlive mask. Then once I got the EZB, will the rest is history. Now it works without having to know how to program. I call him Ricky. I am going to use Ricky for Halloween.
Funny thing is, 4 months ago off work and bored and before I knew about EZ-Board. I bought the head and then added EZB and now it works! Go DJ! in the mean time while surfing the web, I found Robots and Androids who was selling the Wowwee Robotics' Alive Elvis. So I bought it. So I have Ricky and Elvis. And a used R2D2 on the way. This may be down the road maybe 2 years, but I plan on making Elvis mobile.
BTY this is all new to me and I am learning a lot and still know so little just on this borad alone. So thank you and everybody else for sharing. I will post some Pics tomorrow.
You didnt post it in the wrong place he asked the question on both threads lol