I built a biped robot but I found out that the servos that came with the EZ-Robot kit are not strong enough. The hip servos can't lift the legs up. Any suggestions for stronger servos?
By jeffmorris
— Last update
Other robots from Synthiam community
Ezang's Mr. Conehead Dancing, Take 1 - I Will Try More...
This is a test, hard to balance Mr. ConeHead dancing Take 2 soon :-)
Jstarne1's Holiday Video U Command Wall-E And Sled Buildup
I spent yesterday and today building walle and a sled to shoot a video which hopefully I can get all the footage...
Tachyon's First Robot
I was in Calgary for Comic Con and I met DJ Sures. I was impressed with EZ-B and I bought the EZ-Robot kit. I only just...
I got six servos that have torque rating of 240 oz-in and they can lift the legs.
I built the robot that is similar to Lynxmotion BRAT robot. I think the robot is too heavy beacuse the ankle servos can't tilt the robot to one side so that the leg that's not touching the ground can move to another position. Any suggestions?
Jeff, I built a Hexapod and biped using styrene. It's a light weight plastic material you can find at hobby shops or online. It can be cut with laser cutter or Cnc. I just use a razor knife and a ruler. There are many dowels and construction peices to help assemble the sheets (square dowels etc)
I used to use the styrene cement. Now I just use a hot glue gun
It might be a lighter solution for you. Most of the lynx motion kits that I've Experinced are too heavy for even the servos they include
Jeff cheapest places I know that carry styrene are sign and graphics stores. They buy in serious bulk and cut signage out of big sheets. If your nice to them they might even give you scrap for free to use.
I built a new version of the robot from 1/8" plastic sheet and it appeared to work better but I have to replace one part with 1/4" plastic. I tried a hot glue gun but it made mess on the work table.
Glue guns can get a bit dribbly
I have a DIY stand with a small square of tile that the gun tip rests on. No more table mess or concerns of burning where the tip rests. Next up is a light dimmer addition so I can vary the temp as required so that the glue won't be too hot and melt delicate materials.
Any pics of your new version?
If you need more of these hi torque servos, I found a better price for them on ebay. Free shipping too. Hope you get him walking soon. My EZ Robot board has been running 1/4 scale servos with no problems. I may give the servos their own power source just to be safe. High Torque Servos
The robot still doesn't walk well. Is it possible for a biped robot to walk the same way that a person walk?