robotmaker
USA
Asked
— Edited
I made a johnny five robot from lynxmotion and made many changes ,upgraded to higher torque servo's,added another deck for itx board,change the motors for higher torque,looking to add feedback,plus more servo's in arms ,plus web cam and more
Most of this is done already,was going to use lynxmotion SSC-32 servo board until i found the best controller for it EZB
BIGGEST problem finding a small ITX to replace my pico-itx board at 1 ghz 2 gig ram
here is a photo of the design without changes
That's a very cool robot! How big is it? Looks to be a great size!
Basic kit is about 16 inches and i added a second deck about 6 inches high plus added a higher neck for pan and tilt camera instead of the sonar, so i guess it above 24 inches will post photos of my design monday
Oh nice! I cant wait to see pictures of johnny junior!
Awesome robotmaker! I'm in awe....very cool
DJ that new servo Auto Position control you made looks perfect for johnny five project. Also like the ROBOPHILO robot you used with the Auto Position control ,might look in to getting one.
Looks cool, but I hope you change that head for something bigger
yes a lot bigger with vu-meters
these photos are from my friends website,and i made a lot of changes But gives you a idea what mine looks like.
This little close to my design made by another person few added arm changes ,plus the round torso is much higher since i added another deck
he added a PICO-ITX board in back of the robot ,mine in on the second deck i added