Asked
Inmoov Head Fiber Optics Question
I see you designed a nice InMoov head with full movement, and I'm printing one now. Are the fiber optics included with the design, or do they need to be purchased separately? If they are separate, where can I source them? Also, if this head is intended to be controlled with an EZB (or integrated into an ARC project), do the fiber optics connect through the EZB/controller or are they independent of the controller/hardware?
hi roboteers head almost done . one servo to go and fiber optics .
https://www.youtube.com/shorts/ID2KslJADls
hi roboteers
i noticed i have a free left over LED in the rgb . so i mod the eye to use a pupil . i found a 14 MM lens .
short video test fiber optics
https://www.youtube.com/shorts/eO77RCAf-hE
lens 14x1,2 mm
https://nl.aliexpress.com/item/1005003691839019.html?spm=a2g0o.order\_list.order\_list\_main.5.55b079d2NzgF2s&gatewayAdapt=glo2nld
hi roboteers
center eyes no lens yet .
https://www.youtube.com/shorts/IbzhxmsqtMg
hi all
a little progress on the new ez robot head . i made the neck 10 MM higher .
short video .
hi roboteers
inmoov eyes with a lens in it . it gives a little more volume in the eye .
That's really cool! Nice work.
hi dave
thank you its slowly coming together .
hi everyone
what if you don't have your servo's yet but still wants to work on your inmoov head . i made a dummy part so you can work on your head while waiting on your servo's .
dummy.stldummy-2.stl