I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Other robots from Synthiam community
Justinratliff's Jd Spock
The first video of my JD Spock testing his 3d printed phaser. JD Spocks 3D printed Star Trek Original Series phaser,...
Ezang's Some Examples From The Past Of Glyphs, Glyphs With...
Some examples from the past of Glyphs, Glyphs with augmented reality and QR codes Using a USB camera and the EZB4 with...
Mcsdaver's 3D Printed Ez Robot Bob
I forgot to click Robot Showcase so I am starting over here with Bob. Bob is my 3d printed EZ robot built with EZ-Bits,...
Thanks RoboHappy,
I plan to fine tune the robot maybe next week - maybe some auto-position moves, voice activation moves, I'll see.
How are your projects coming?
EzAng
Good morning nallycat,
I did place 2 micro servos for the mouth this morning, looks a bit better - I will send pics, video when I get back to city life.
EzAng
Well back to the country / farm life again, only a iPhone hot spot there - see you next week - All be well and safe
EzAng
Hi RoboHappy,
What is the latest with your projects?
Still at the farm, my robot activities end here, many other thing to do. :-)
EzAng
Good morning everyone,
How goes the robot adventures?
I brought my robot to the farm, I will see what I can accomplish here.
All be will,
EzAng
Well, good morning again, how are you all?
Today is Sunday 7/19/2020
I will be on my way soon, after a few things here, back to my city life - robot activities :-)
Plan to re-do some things on my robot - the metal one above.
EzAng
Good Morning 7/21/2020
New pics, video
another video shortly
Robot - Mr. Metal
New Robot 7/21/2020 Approximately 3 feet tall
Arc software: using
I am using a Ezb4 controllers, battery, 7.4 V EZrobot 1300 with four Ez 360 HDD servos for the two arms with 4 servo City gear boxes 4 servo City channels for arms.
I am using 2 iotiny controllers / batteries, 2 EZrobot 1300 7.4v for camera and camera servo, 2 RGB lights for eyes and two 996R servos for the 2 servo City grippers. For movement, a servo City Prowler Robot Kit (wheels) with one of the EzB-4 controller and an H-Bridge PWM motor driver controller.
2 Micro servo Motors for the mouth and a 996R servo for the DF-Robot rotation hex base for the head.
Many servo City plates, screws, nuts, extensions
EzAng
Coffee time !
EzAng