This Inmoov is a big project for an armature like me. I have lots to finalize and complete. I will be starting to add scripts in EZB4 to being Inmoov alive in the next few days, maybe weeks. I know this will be the hardest for me as it makes my head hurt most often then none. stress I know I will learn many new things as I progress. And not to fool my self, I will probably have many questions.blush
I just ordered my second EZB4 for all the servos this robot needs.
In the mean time I will use one of my EZB3 with the EZB4.
By Redzone
— Last update
Discover more robots
Autiboy's Max The Robot Based Off Of Inmoov
InMoov-based robot Max, fully 3D-printed and assembled; first 3D-printed robot with a FreeCAD-modified custom ear.
Grimjack73's The Presentation Piece
Present EZ-kit with DF Robot components for a polished hardware build ready to be programmed and demoed.
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
Wow this is quite impressive! I can imagine this thing riding around on those Airwheel S3 to make movement smoother. Can't wait to see what comes next! keep up the good work
It's been too long since I post my project. I have stopped building my innovation for now, however, I plan on building my second inmoov using Arduino to power and control the servos using ARC and EZB v4/2 to control the Arduinos.
I also plan to post my progress with updates, unlike my first inmoov.
Here are a couple pictures of my first inmoov.
The screen is real sharp in the chest
Thanks DJ