ezang

to oblique the head i use normal HDD 180 servo for now . i dont have a clue what to do for the front servo . i dont get  no notification on this topic.

You know, maybe his mouth can open a little more , if you can when he speaks

just a thought

EzAng

ezang

yes he can . ithink the mouth doesn open much when there is to much distortion the mp3 file . when he speaks it great .

Nomad, have you played around with the delay settings under the Talk Servo, to get Inmoov’s mouth more in sync with the words. Also adjust the max and min to get his mouth opening more?

hi cem

yes i did . it just happened when there is much distortion in the mp3 file .

admin

i dont get notification when someone replay to my topic.

i found a way to control a continious rotation from start to finich. 1 make in the Movement Panel a motion stop and ad a port and set to 90 degrees. 2 make a script write  stop() 3 second script write move(d12,"forward") ( you can use any port ) sleep(100) controlCommand("Auto Position", "AutoPositionFrameJump", "Stop")

the lower the sleep the chorter the servo will move . sleep(10) is about 1 MM the higher the sleep the longer the servo will turn. the servo stops auto when reached the sleep.

here a little video

Hey right on Nomad  glad you got it going!

hi roborad

thanks for the link . tomorow i give  my inmoov a yes motion.