All Community Content

My Ezb V4 Doesn’T Connect

I have two EZBv4 s and trying to get the older one working again. I reset it at pin hole yellow lights flash and pink then flashing blue light, EZB wifi connects to my P.C. okay and Arc does see the EZB in connections but as soon as I hit connect it goes solid blue for 3 seconds but then starts flashing again with message saying EZB is on correct...

EZ-B V4 No Longer Connecting, Shows Firmware 0000000

Please see below the logs when trying to connect from connection diagnostics How do I fix this? It was working perfectly until today EZB 0: EZB 1: EZB 2: EZB 3: EZB 4: Windows version: Microsoft Windows NT 10.0.17763.0 Screen Resolution: 1280x720 (96x96 dpi) EZ-Builder Version: 2019.05.08.00 Attempting connection on 192.168.1.1:23 Connection...

2 Ezb Controllers For Jd And Wheelbot

Hello, Athena. I have a JD Humanoid Robot and a three-wheel chassis that Im using as a transport platform for JD. The chassis is equipped with two continuous rotation servos (360-degree servos). For my project, Im considering two options: connecting these two servos directly to the EZ-B v4 controller of the JD or using a separate IoTiny controller...

How To Implement A Ramp Function To A Motor Value Derived From A Map Function.

Hello @Athena, I am experiencing difficulties with implementing a ramp function for motor values that are determined using a map function in my C++ code. Could you please review the attached code and provide guidance on why it wont compile? The variables leftSpeed and rightSpeed are the values produced by the map function. Thank you, Jack cpp void...