I've always wished I had started a Project Showcase type of thread when I started running my InMoov robot with EZ-Robot. So I'm going to start one now. The first few posts are recaps of the threads I've done, I'll put a link to the original thread so if someone wants to see the discussion they can. Anything I do in the future will be posted on this thread.
Here's the first thread I posted with my InMoov running on EZ-Robot. Original thread - https://synthiam.com/Community/Questions/6670
By bhouston
— Last update
Other robots from Synthiam community
DJ's Philo Junior Color Tracking Test
Control Philo Junior with Synthiam ARC camera 'Track By Relative Position' and WiiMote for simple, cost-effective,...
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
Kenny's Humanoid #2
15 DOF humanoid robot built from a budget eBay kit using MG995 servos, EZ-B head control and Castle 10A regulator; power...
Here's the thread with InMoov doing math. Original thread - https://synthiam.com/Community/Questions/6785
Some of InMoov's sensors. Original thread - https://synthiam.com/Community/Questions/6786
Here's the video I did with InMoov and a robotic arm. Original thread - https://synthiam.com/Community/Questions/6907
InMoov's new base. Original thread - https://synthiam.com/Community/Questions/7582
This is a Christmas video I did for EZ-Robots Christmas video competition.
And a "Thank you" video - I/we got the Peoples Choice Award.
This is a Gripper I made for InMoov, more just to see if it would work and it did. EZ-Robot makes it so easy. Original Thread - https://synthiam.com/Community/Questions/7669
This the thread on the neck I designed for InMoov giving more freedom. Original thread - https://synthiam.com/Community/Questions/7787
This video shows off InMoov's mood ring.