Target Overlay icon Target Overlay — Overlay translucent PNG targets onto a camera stream with loadable templates, attach/detach control, preview and status for visual alignment. Try it →
Tutorial
USA
Published — Updated
Download as PDF

Steps

  1. Laying out the wheel
  2. Layout slots for bracing
  3. Cutting out the wheel
  4. laying out and cutting the bracing
  5. Glue in the braces
  6. adding the tire
  7. Heating the hardboard for the curve
  8. Finishing the first layer
  9. Starting the second layer
  10. Finishing the second layer

Wheel Building With Basic Power Tools

Step 8 of 10
Finishing the first layer

Here is the first layer finished. Notice the gap, and the way the ends have turned up. Don't worry. this is normal! You have to do a second layer to correct this. The next layer is a lot easier!

User-inserted image

« Previous Step Next Step »

ARC Pro

Upgrade to ARC Pro

Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.

Login to post a comment