DHT11 Temp & Humidity Sensor icon DHT11 Temp & Humidity Sensor — Read DHT11 temperature and humidity on Arduino (signal pin 4) using EZ-Genuino_DTH11_Uno firmware; exposes $Temp and $Humid variables. Try it →
Tutorial
USA
Published — Updated
Download as PDF

Steps

  1. Laying out the wheel
  2. Layout slots for bracing
  3. Cutting out the wheel
  4. laying out and cutting the bracing
  5. Glue in the braces
  6. adding the tire
  7. Heating the hardboard for the curve
  8. Finishing the first layer
  9. Starting the second layer
  10. Finishing the second layer

Wheel Building With Basic Power Tools

Step 2 of 10
Layout slots for bracing

User-inserted image

Here is how I laid out the slots for bracing. They are 3/8 inch wide, by 1/4 of the radius deep, in this case 1.25 inches. Measure and cut them as accurately as possible, because they will be glued in, and they are a major part of what keeps your wheel true and square.

« Previous Step Next Step »

ARC Pro

Upgrade to ARC Pro

Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.

Login to post a comment