Lazy much? Blind control to major tom... I can now control the blind/shades on my deck from my phone! With a little bit of hot glue, a couple wood screws and some pieces of 2x4 ends I had lying around.
By DJ Sures
— Last update
Discover more robots
DJ's Imperial AT-AT Walker Robot - The Force Is With Me!
Build an Imperial AT-AT walker robot; adding knee servos tomorrow to teach it to walk as a return to robotics.
Boon's Boon's Robot
Build a DIY Synthiam ARC robot with EZ-B: toy-car base, motors, steering, camera, sensors and PWM/analog battery...
Faengelm's Rider The Ball Kicker Servo Port Numbers
Set Synthiam ARC project port numbers to run Auto Position Actions like Kick, Thanks, and Frank for proper action...
Came in late on this one
Haha - no prob
i read UB places some safety stuff in the robot.but that is not the only problem. if you make poses and you get an update ,your poses are gone. i had bouth a alpha2 on indiego,but now i cant get on there server, means i have a useless robot.
great text about the batteries
i just saw the video again end it solved a problem i had some time ago.i got a message in ARC saying your main project is not set ,(mobile ). i just saw you can set it in the cloud save under ezbv4 is main control for mobile.
in post #6 alan speaks off a batt Lead Acid gel cells .do they excist for 7.4 volts? and its only for an ezbv4 whit cam,nothing els.also would it be save to use the , ezbv4 for lets say 12 to 18 houres on power?
Typically 6v or 12v. EZ-B with just camera could use either. You only need 7.4 if using servos.
How long it will run depends on the amp-hours the battery stores vs the amps drawn by the EZ-B and camera (which is not much).
Alan
hi alan
i found this batt. what do you think.
batterie 6 volt
and this charger
charger
Those look fine. It will take about 6 hours to fully charge the battery, but with 12 amp hours that battery should last a long time between charges. The EZ-B and camera draws just 180ma, so it will run for a couple of days between charges if I am doing the math right.
You will need to set the low voltage alert to lower voltage or disable it so the EZ-B does not complain.
Alan
alan thank you.now i have something to go on.set volt to 6 volt on the web page