Hello this guys, the above is my testing platform that I have been working on for the past two weeks or so. The only cool nerdy name I was able to come up with is R.A.I.D ( Robotic Artificial intelligence device.)
With the 4 D batteries, It is pretty heavy, walk to slow to roam around the house freely as a reasonable speed, So I added track wheels (Dagu Rover 5), awesome grip.
Need you guys opinion, should I take a step further and remove the Robosapien Legs to reduce weight? Also plan on replacing right arm with an actual robot arm.
By PJ_Dtechy
— Last update
Other robots from Synthiam community
M's Haw To Make Ez-Bv4 Controller Communicating Via Usb...
dear friends we are working on (non profitable) agricultural robot to combat desertification in Africa pleas see...
Ezang's My New Adventruebot Robot
I dont know if this worked before, well here it is, new adventure Bot
Jstarne1's Ladybug Lawn Mower 3D Designing The First 3D...
Hello All, I am sharing early images of one of my current projects that is actually meant to be released as a kit. This...
PJ there are a few ideas to supply voltage to the robosapien,one is use 2 separate 3 volts power supply circuits ,from a
12 volt or 6 volts or any type battery you want.,this idea is the easy way.
Second idea is that the robosapien robot uses a 6 volts to power the robot and you need to take it apart and look for the wires from two 3 volt battery where 2 wires are connected in series and connect your 6 volt source to the other wires. this one is kinda hard because you need to take it mostly apart. I can look for the ling again on the connections to the main board on the robosapien is shows the pinout of all the wires.
IF you need help i can help you no problem
I actally had both ideas in mind also. I have two voltage regulators, the idea was to supply 3v per leg to mimic the double D cell batteries. The plan was to use a 7.2 lipo rechargeable battery taking out of an R/C plane, use the voltage regulators on each leg gear down to 3v. Or use that same battery with one regulator set at 6v. My robosapien is already torn apart. As an enthusiast I cherish the loose wires, exposed circuits, resistors, etc more than the Plastic shell cover. I think it look more sexier. So taking apart is already taken care of
.
Yes I have already located the main voltage wires for Robosapien was second guessing myself about feeding it 6v, afraid to burn it.
Sadly due to my heavy work load and the move to a new location, haven't really had time to tinker, measure the Robosapien current, do trial runs etc.
But I really appreciate you pointing me in the right direction.
Help me plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
I mostly know a lot on the wowwee line of robots since i work on them ,only lack in programming ,but scripts look fairly easy.
Also like you way your computer office is setup it looks a lot like mine,only thing i add is a JARVIS design so i can ask question ,find websites all by voice like in the iron man movie and networked in all my rooms in my house.
MIGHT think about adding it to your design
@robotmaker thank you, yes I am running a custom PC. What software are you using to mimic Jarvis. I search the web High and low with little amount of luck. I use dragon naturally speaking 12 and window speech recognition. I am seeking something like Siri (IOS) assistant (android) for the PC window platform.
PJ here is a youtube video on how to make jarvis with free software ,there are other ways but most you need to buy the software ,plus there are more on youtube and looking to try them and compare.
ALSO making the table jarvis tony stark use in iron man 2
MY whole house is going to be jarvis and workshop i hope to put activated doors with a security pad just like in the movie.
Currently using that same set up, not quite what I'm seeking for, so I am developing my own. will share my beta.
THERE are many more on you tube,looking to buy a software for jarvis