i found a cheap max robot from meccanoid.and i am going to give him , an ez robot costume hehe,lol.the drive base looks very interesting. here a small video.i started with the gripper.
More robots by Nomad 6R
Other projects from the same builder.
Nomad's Remix Inmoove Head
Modified EZ-Robot head with pan/tilt, three extra HDD servos, dual-camera cable pass-through, IoT/EZ-B v4 ready, InMoov...
Nomad's Mini Version Boxbot P2-V1
Printed BoxBot P2 V2 desk robot for camera and position training with 4 micro servos, blue eye LEDs, swappable leg...
Nomad's Bond Bug .Jd's Vehicle
Bond Bug-inspired three-wheeled car build for JD using an old vacuum cleaner as donor chassis; part 1, ongoing tweaks.
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
DJ's Hasbro R2d2 Hacked With Iotiny
Upgraded Comic Expo robot hack powered by EZ-B IoTiny with v4 camera vision, LED animations, motor controller, HDD...
Ezang's Mr. Metal Again 2021 - Made From Servo City Parts -...
Greeting from Mr. Metal wishing everyone well and announcing a body move soon - signed EzAng
Cardboardhacker's M2d2-The Diy Miniture R2d2 By...
Build an R2-D2 replica from a Lysol wipe container using cardboard, servos and a ping sensor, finished with paper-mâché...

here an update max the robot and a cry for help.
here's how max looks like.
he has wheels with two cable each motor.i try avery config,nothing works, with the Hbridge.the Hbridge works .
does any one knows how to fix this.
thank you
Did you test motors seperately with a battery ? That should work. Maybe motor driver is bad. I have had some that did not work brand new.
hi
indeed i put 6 volt straight on and nothing works.first time i put 7.4 volt on from the lipo batt.is that the reason that the motors are death ?
That looks really great - seems the two robots combined were made for each other!
hi dj
the meccano parts are good .but not separt to by.tomorrow i disseassemble the , drive base.checking the motors. it has a lotiny too.and big speaker on his back.
thanks
rb550f
problem solved.the motors where good.there was a little disk with holes on the side,i think its for distant messurement. i don know how its calt.i cut it out and solder a new wire on.motors ok. tomorrow i make a video of MAX the robot.max has a ezbv4 and a lotiny. the radar ping sensor.and separt speaker.rgb and cam.
thanks for the tip.
here's a video of max in motion.
Very well done Patrick! What fun. I'm glad you got past the motor trouble and got him running. Now you can spend time programing him to do more things like bringing you one of those famous Belgian beers that taste so good.