I decided to make a smaller test-bot. My wife said I could not buy or make any NEW robots. So, I took my BOB Frizby robot that was made from an Arduino apart and made an EZ-BOB. It is a little lopsided. But, I expect when I have time, I intend to square it up. It has red eyes that glow. There is a lesson to be learned here. I spent $5 plus for each blue LED. I was expecting them to hold up with 5 volts applied. But, they burned out quickly. So, I did not have the money to buy more, so I made him with RED eyes and put resistors in series to dampen the flow of current.
Without further Adoo, here is BOBII:
By MovieMaker
— Last update
Discover more robots
51M0n76's Meet Arnie
Homebuilt robot Arnie with pan/tilt head that looks around freely; awaiting H-bridge for mobility, plus paint and arms.
Steve's Ez Robot Railroad Observation Car
Control an EZB4-powered camera observation car on a Silverton O Scale Railroad using EZ Robot and servos for live...
Peterfrisch's It's Yellow, It's Boxy, It's .... No Wall-E...
Convert a Caterpillar toy with EZ-Bot: install continuous servos for treads, hot-glue servo horns and route cables for...
@007. Right now, I have two Servos on the arms in the front and two servos in the bottom for Left and Right. What you are talking about are probably the sharp IR sensors. I have top and bottom center PING ultrasound and front,right and left IR sensors. Also, I have pan and tilt servos for the head. This may be what you are talking about.
:-)
Isn't a shrunk tablet just a smartphone? (actually, my smart phone is better than my tablet).
Looks really good dude.
And hopefully it'll be moving soon, I left a little present for you on the cloud and in your topic about the problems you were having
@Rich, I have to hook up many usb ports and sound cards and speakers, etc. Take a look at Marti.
Thanks for the help.
Ahh yes I see they are sensors now. I was looking at it on my phone:(