DHT11 Temp & Humidity Sensor icon DHT11 Temp & Humidity Sensor — Read DHT11 temperature and humidity on Arduino (signal pin 4) using EZ-Genuino_DTH11_Uno firmware; exposes $Temp and $Humid variables. Try it →

The Goal Is To Build My Own Ro

Skip to comments Jump to end

The goal is to build my own rolling BB-8 droid as inspired by the new Star Wars movie! This seems to be the start of an expensive but FUN hobby.:)

By
Jess
USA

Discover more robots

Confoundedhound's Modified Omnibot 2000

Confoundedhound's Modified Omnibot 2000

Refurbishing an Omnibot 2000 with new paint, +8" height, Asus t91mt netbook, and planned EZ-B controller - open to...
Tmesserschmidt's Meet Melvis: My Ultra Humanoid Robot

Tmesserschmidt's Meet Melvis: My Ultra Humanoid Robot

Melvis humanoid uses EZB for everything, Elvis-faced head, 3D-printed InMoov arms, planned Segway mobility and future...
Steve1dh's Test-Practice Bot

Steve1dh's Test-Practice Bot

Test robot on Steel Tec tray base with EZ-B, ping and IR sensors, pan-tilt camera, joystick control, LED and servo lift...

ARC Pro

Upgrade to ARC Pro

Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.

Login to post a comment