This is a tutorial on how to modify the Tamiya Bulldozer to be driven by modified servos rather than the DC motorset. The software controlling this robot is ARC.
Description:
The Tamiya Bulldozer Kit is a favourite amongst robot builders. There is only one problem with the kit... It is powered by DC gear driven motors, yuck!
This project demonstrates how to modify the bulldozer kit to use modified servos in place of the DC motor set. The modified servos provide greater accuracy of speed control. They are also pretty strong without needing to move quickly.
The software controlling the robot is ARC.
Video:
Peripherals:
1 x EZ-Robot Complete Kit
1 x Tamiya Bulldozer Kit
1 x sharp gp2d05 distance sensor
Tools:
Screw Driver
Small Side Cutters
Hot Glue Gun
Zip Ties
By DJ Sures
— Last update
Other robots from Synthiam community
Dave's Resurrection - Another Full Sized Lost In Space B9...
There is no control yet in this robot. However with the upgrades Im planning for this robot, Synthiam arc and the EZB...
Williamk's Inmoov
Humble beginnings. Havent gotten beyond testing the movement of motorized pieces as of yet but everything is basically...
Ezang's My New Robot Hand To Practice With - Video
My new robot hand to practice with, using ARC, auto position and an Arduino uno - I used a glue gun to glue the servos...
I kinda want you to reupload the video please
It's been almost three years and I haven't noticed you put it up again, but thank you!
Haha wow you're pulling out all the good ole historical videos lately!