You may have seen this video of a real large ez-robot hexapod...
That is a robot i built over the summer at my cabin with a 3d printer for the Intel IDF16 conference in San Francisco. It was meant to be powered by an Intel Joule, but I threw an EZ-B v4/2 Wi-Fi Robot Controller in there instead
For those interested in making their own, the servos were the costly part. The servos i used were very heavy duty: CYS Digital S8218 servos. Which are 38kg/cm at 7.4v! They're incredibly large as well, at 59.5cm x 29.0 cm x 55.2 cm.
Here's the STL files to 3d print your own:
- Foot.STL
- HexapodBodyBatteryCover.STL
- Hexapod Body Bottom.STL
- Hexapod Body Top.STL
- Hexapod Dome.STL
- L Bracket.STL
- U Bracket.STL
You can see the difference in size compared to the regular Six Hexapod
By DJ Sures
Other robots from Synthiam community
Fattywoo002's My First Bot - Dodgy Casebot
Build a Dodgy Casebot with EZ-B and EZ-Builder: 5 servos, gripper, sonar, random personality, Wii/keyboard & voice...
Rgordon's Magnus The 6 Ft Robot
Magnus: a 6 ft, 300 lb humanoid using wheelchair motors to drive tank treads; builder exploring E Z Robot kit and...
Ezang's 3D Printing Again 7/18/2021 - Detecting A Sound File...
Mr. Metal returns - audio may be low; increase volume and leave a comment for EzAng.
