Well I spent a little time and decisions on how I should make the look for omega's bipedal concept design and I came out with this, of course the arms my change if the fembots arms are released for sale on xlrobots.com becuase they are better designed and a five finger gripper is a must lol
By Linux robot 92
— Last update
Other robots from Synthiam community
Cochranrobotics's Inmoov - D.Cochran Style
InMoov 'Spock' rebuild using LattePanda, dual EZ-B controllers, Omron HVC-P vision, MXL mic, Flexy hands, BEC power...
DJ's Super Six Hexapod
Large EZ-Robot hexapod built with 3D-printed STL files, EZ-B v4 controller, heavy-duty CYS S8218 servos, ready for DIY...
Andy's Lilian Is Assembled And Running
Lilian DIY robot with EZB v4: face/color tracking, voice-controlled drive, arm servos and grippers, MP3 replies; owner...
I'm not sure, i was going to use the a HD7 Lexi arms with moddifed shoulder joints for max flexibility from your xlrobots website and the legs I was also going to use the xlr one's arms with moddified elbow joint part for the ankles, also the feet are basicly a bigger scale of jd's feet or ones simular to asimo's feet and I am going to distrubute some bolts,nuts and springs as a way to reduce the weight on the joints and to straighten its ability to walk or pick things up. As far as the bipedal motion goes I will just have to study my anatomy to understand the motion of walking in human bipeds and use a series of trial and error to come up with a perfect motion for omega, he will most likely be suspended by cable for a lil while til he gets it right lol