This is my 16th robot project EWA. Built from a Walle Ucommand toy. It has a 3d printed head from Xlrobots. I added a cooling fan to the front for a more industrial look. He has led mouth that uses a sound mic.Used hd servos for the head and neck. Micro servos for the arms and continuos hd servos for the tracks.Uses EZB V3 as controller .Installed 5000 mAh li-ion battery pack. Has carry handle attached to his back. Left the original sound board for sound effects. The concept is that if Walle and Eve had an offspring this what he would look like..Makes great little companion in my workshop.
By rb550f
— Last update
Other robots from Synthiam community
Bhouston's Another Inmoov Modification
I redesigned the Top Stomach Pistons for quicker movement. The STL files are on Thingiverse....
Robotz012248's Project Gizmo Underway!
Thought Id post some pics of Gizmo. Thanks to a great friend that has been helping me Project Gizmo is under way! Im...
Sudo's Project Shogun
Ive started work on my humanoid once again, and this is the thread where Ill share all of my discoveries and such with...
I have not posted a video yet because i have used my data allowance for the month .I will when it resets. Only the arms move with servos,not the hands.
Hi, it's Beth from that store in the mall. Just wanted to THANK YOU for your help in Miami Florida. I haven't gotten the problem resolved yet but I look forward to getting this project up and running. I did ask about the battery when connecting it and sure enough you were right. It was charged as it was put together. Again, Thank you for taking time out from your vacation to help
Great Job! It is the cutest robot. :-)
Excellent job! Looks great!
@rb550f
I'm looking for candidate 'bot heads to serve as user (student) interfaces with my remedial math tutorial system. It looks like Alan's availability will depend on the Indiegogo results and would not likely to occur until February or thereabouts. The EWA head might work well as an interface for middle school or even high school students . . . so this is your own design, right?
I would need a design that supports these minimal requirements:
SPECS: EZ-B v4 based Must support devices needed for Face recognition (digital camera), Voice recognition (microphone), Handwriting recognition (digital camera), Voice synthesization (speaker) Neck must have two degrees of freedom
Except for v4, does that match up with what you have done with EWA?
If so, in a few weeks, I'd like to talk about purchasing a head so that I can evaluate its fit with my project. Right now, I'm using a JD head for prototyping but am not sure that it will be the "go to" head for the final project.
Ron
Also, can you tell me something about the servos you are using?
Ron
Excellent job, nice robot. I hope the video will show us behaviour of ewa. :-) I am looking forward.
I use metal bearing hd servos for the head tilt and rotation..There are 2 micro servos for the arms and two continiuos rotation hd servos for the tracks.Since it has a Ezb v3 I use bluetooth audio and the original 2.4 ghz wireless camera.Can easily be used with Ezb 4. I just didnt have another Ezb 4 at the time of this build. Power is (2) 5000mah batteries at 3.7 volts each in series.