USA
Asked — Edited

Ezb Controlled Lynxmotion Johnny Five Robot

Skip to comments   Jump to end

I made a johnny five robot from lynxmotion and made many changes ,upgraded to higher torque servo's,added another deck for itx board,change the motors for higher torque,looking to add feedback,plus more servo's in arms ,plus web cam and more

Most of this is done already,was going to use lynxmotion SSC-32 servo board until i found the best controller for it EZB

BIGGEST problem finding a small ITX to replace my pico-itx board at 1 ghz 2 gig ram

here is a photo of the design without changes

User-inserted image

will be posting photos of it with changes,it a little apart for more upgrades kit is about $900 and to add very high torque servo's about $1300 like i did 16 servo's now and might add 2 more for drive


ARC Pro

Upgrade to ARC Pro

ARC Pro is your gateway to a community of like-minded robot enthusiasts and professionals, all united by a passion for advanced robot programming.

#73  

PRETTY soon will be posting many many updates of my robot projects and boards i made Been working for a few weeks building boards and updates.

USA
#74  

Nice.... looks awesome.

#75  

Thanks making side covers for it next,need to use 2 EZB because so many digital ports and analog ports.

#76  

Nice , I like the progress , great job buddy

#77  

I started on the led VU MOUTH to be controlled by his voice

User-inserted image

#78  

Call me lame but I really dig the LED mouth concept. When I'm confident enough to build a robot using more than the EZ Complete kit I'll be using a LED mouth. I'm excited to see your progress.

#80  

WILL post circuit up soon,it uses LM3915 bar graph chip and few parts,there are a few kits out there BUT not as much fun as building the circuit from scratch.

THE design will have bar graph on the sides just like johnny five has.

Login to post a comment