Can you add more information about what file you’re looking for? If someone has it, it would be useful for them to know what the file is. Provide a description and also include the type of robot. Good luck

hi synthiam support

sorry late respons .

i found the mayor prblem why the inmoov mouth doesn close . also i have the fix for it . first i made the hings adjusteble ,see video . what needs to be done is to adjust the top of the  lower jaw . see picture .

short video ( injoy inmoov builder )

https://www.youtube.com/shorts/UcmioSGnmlk

new file

jawhingslot.stl

hi

also the jaw spacer is modified to get more closed mouth . in the picture its upsidedown . gear all the way down .

jawblok.stl

That's great work, Nomad! You're very good at designing parts for 3d printing. That's a great skill to have!

hi synthiam support

i modified the lower jaw and the moves are very smooth . its easy to do in TC.

https://www.youtube.com/shorts/FDtnoJ8DktU

jawmod.stl

hi

another thing i changed . is the way how you screw the iotiny on . use only the top/front screws en below ( left ) mini zip ties . i made a hole to use , a small zip tie to secure the iotiny . also mod the batt holder .

BATTSUPPORTmod.stl

skullsupportMOD.stl

hi inmoov builders

i notest by glueing the M3 nut in 3d parts , many times i cant get the bolt out or in . super glue has a strong vapor that sticks to the nut and bolt . ones dry i could not , get the bolt in or out . so i start thinking . there is only one correct way . put some super glue inside the nut inlay and leave it for about 3 minutes . then the vapor is gone and you can put the nut in . or pull the nut in .

https://www.youtube.com/shorts/3QF3qiIgrDM

hi inmoov builders

any idea what this is ? i hope it works , have to test it first .:D