PRO
Rodney Mckay
Canada
Asked
— Edited
I'm having difficulty with the Autonomous AI robot skill in ARC.
Context:
- I'm using the Autonomous AI robot skill in an ARC project. Servos are assigned to ports in the Skill's servo tab by servo Port #.
- For each servo I set Min and Max movement values, Idle Sway, Width, and Random values within the Skill.
What I do:
- In the Autonomous AI robot skill servo tab, I assign the servos by port number and set Min/Max, Idle Sway, Width, and Random values.
- I click Save and make sure Pause is not checked.
- If I reopen the servo tab, the Idle Sway, Width, and Random values I set are still shown, but the Min and Max positions for every servo have reverted to the defaults (Min = 1, Max = 180).
Troubleshooting I’ve already tried:
- Restarted the computer.
- Created a new ARC project and repeated the same setup - same result.
Additional details:
- I’m running the latest ARC version.
- EZB model: EZB4.
- Servos are connected to the EZB4 and are working.
I can provide the exact ARC version, EZB firmware version, and screenshots of the servo tab or project file if that would help.
