I would like to build a robot with magnetic feet that I can use to inspect the duct work in my house. One of the most energy draining appliances in the common home is the HVAC system. If the duct work has holes or other large gaps, then the HVAC must work even harder (i.e., be even more inefficient) to achieve the temperatures desired by the occupants. My house is old, and the duct work is leaky (as measured by a flow balance of the system). I would like to make a robot that can be used to explore this part of my house to determine what I should do next. After looking through your website I'm thinking a combination of the hexapod structure with the modified feet of the Galapagos and a camera on a tilt/pan setup.
By Jnreck
Other robots from Synthiam community
Khanflicks's Minion Project - Help With Eyes / Mouth
Convert a 20" Minion toy into a humanoid with EZ-B v4/2: camera-tracked movable eyes, sound-driven moving mouth,...
Rb550f's Ez Robot Attacknid
Attacknid six-legged robot using two motors, Dual H-bridge with EZB, lithium power, six ultrasonics and EZB camera tilt,...
DJ's I Shall Call Him Norm
Norm is a very fitting name, affirming its aptness and suitability.
