I am building a Mars rover project and am incorporating cybersecurity for a school project. I will be using a 6 wheel Bogie Mars Rover base with EZ-Robot controller with camera on a Pan/tilt for the rest of the electronics. I will also be adding a drone (multirotor) to this project as Phase two that communicates with the rover and HQ (my laptop). I plan to take pictures and video of this in action up in Sedona, AZ where with the red rocks and dirt look like Mars. Phase three is where I incorporate cyber security measures to see if this setup would be hackable or how I can prevent it from being hacked.
By GortBot
Other robots from Synthiam community
Steve's Eddie. The I-Cybie & Synthiam Mongrel Robot Dog
Convert an I-Cybie dog to EZ-Robot/EZ-B v4 with servos, camera and sensors, documented build and Synthiam ARC...
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
Edison2's R2d2 Star Wars - Kinect!
R2D2 integrated with Kinect using EZ-B showcased at Campus Party Quito-easy robot building with EZ-B, demos and...
