With a robot, of course! What did you expect?
This is a robot shell that I built with some students in the summer for a robot challenge. The robot chassis is from an electric seat scooter. I attached part of a shovel to it and stayed warm inside, while the robot did all the outside work
By DJ Sures
— Last update
Discover more robots
DJ's DJ’S Test Platform (K8)
Synthiam ARC test robot: Devastator tank with Rock Pi/X, Sabertooth+Kangaroo, Realsense D435i/T265 for autonomous...
Joseph4760's Project X-Men Juggernaut
Merge an MGA-1 Quadtrax with a Robosapien torso: hack the circuit, remove canopy, mount torso, run on EZ controller then...
Cliffordkoperski's HAL THE ROBOT THAT WALKS AND TALKS
5.5ft humanoid walks, talks-56 servos on 3 EZB v4 boards via WiFi, two batteries, onboard PC; Synthiam ARC scripting...
With the recent snowfalls in our area this is a timeless idea. Makes me want to go find an old scooter to hack.
That is such a great idea as out here in Barrie we are in the snow belt area and not looking forward to the rest of the winter. They do sell these type of ready made snow robots (I think,will need to double check that) similar to lawn mower bots but cost a small fortune,best to make your own with an EZB anyway! Also DJ thanks for that Ebay Link on the motor controller it gave me more insight on what to look for in my new projects! I have learned more in the last week than what any damned technical college ever could in a year,All hail EZB and Synthiam!