PRO
Sproket
USA
Asked
— Edited
Hello All-
I load the Camera skill and camera works for a very short time then I get -
Camera Initialized: EZB://192.168.1.1 @ 320x240 EZ-B v4 Camera Error: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. Camera Disabled
ARC version 2022.02.22.00
Thanks for helping
It appears you are using an ezrobot camera perhaps connected to an ezb v4 or iotiny. According to the ezrobot diagnosis on their website, the cable could be loose. Try refitting the cable to ensure a secure connection.
Also there may be an issue with the wifi signal. Sometimes changing the wifi channel will help.
Yes Im using iotiny, I will reseat cable and try another channel.
Thank you
hi sproket2009
the cam number is desame as your iotiny number . whithout the :23 .
Im using AP mode and by changing the wireless channel corrected the issue.
Thank you all for great and fast feedback.