@McJeff0125 That's a completely different take on it to what I thought he was on about. I had presumed he was going to use the Server function (towards the end of the video) to connect both ARCs together.

Either way, there are still no EZ-Script commands that will help on the scripting side of it all and no way around the IP conflict issue either.

HE doent know me,i never ever give up till i get it working And best part i have a network friend that know much much more then RICH about 20 years

SO wait for my video in about a week,i am waiting on another USB wireless and then my network friend will tell what to do.

THANKS MCJEFF0125

WAIT for the VIDEO it will show proof

still has a problem not with network conflict ,buy using server command and scripting ,wont know till i test it,since i have both ROVERS and RICH doesnt own any

since he post a video on the windows 7 problem saying it faster ,i am going to prove it works in a VIDEO to show mine working

I cant see why RICH is commenting on something he is not building or have DOESNT need too,but i guess its personal to him.

This post is my rover design not his,and he should wait until my design is finish with video before he makes comment IF you notice MCJEFF he coments on everything i ever posted saying my electronic designs dont work and many other posts

HE does know about windows 7 and scripts,but he said he doesnt have a degree in electronics and yet he says my circuits dont work

@everyone else (especially DJ and the EZ-Robot Inc team), I will start by apologising for this but I feel it must be said. I will not be engaging in any further discussions with robotmaker directly (however will still advise on topics regardless of his involvement).

@robotmaker stop attempting to belittle me. You know nothing of my experience. My knowledge of networks in this topic has not been at fault. I've proven myself every time I've ever corrected you and on many occasions gone above and beyond reasonable to prove myself, you not so much other than getting aggressive whenever questioned or corrected. You are a childish idiot with an over inflated yet extremely fragile ego. You said that growing up was a good idea yet you follow it with remarks like those? That isn't the way to grow up.

I've done nothing other than point out there are problems with this project, ask how you are getting around them and explain what the problems are, and why they are problems. I've spend the best part of this topic trying to educate you on IP conflicts patiently and in a civil manner, which you disputed and disregarded until they were confirmed in another topic. Yet you continue to attempt to belittle me and my knowledge with no justification and no reason.

You claim I always pick on you and correct only you. This is not true either. I have not long ago corrected a script in the script forum. I've corrected Josh in the past (ATX PSU project) and suggested other ways of doing things (Saltwater timer script) and that's just off the top of my head. They haven't taken it personally, they no doubt saw it as the help it is intended as and if they didn't like it they disregarded it. Just like you can.

For the record your network friend should have informed you that you will need more than one wifi dongle. If you plan to run both Rovers from a single PC by writing your own firmware and changing the IP address you will need 3 network connections (LAN, Rover A and Rover B). If you plan to use 2 pcs, one for each rover you will need 4 network connections (PC A LAN, Rover A, PC B LAN, Rover B).

Also please link to topics where I have said your circuits wont work. I have not made any unjust corrections to anything you have posted. I have only corrected you when you have been wrong. Prove otherwise or grow the hell up.

No doubt you will attempt to turn this all back on to me "picking on you" or whatever but before you do please take a moment to read all of my replies, each and every one (bar one for which I'm sure I can be excused of) has either questioned a potential problem, advised on a potential problem or explained why there is a problem and sometimes (if there is one) a possible solution. The same goes for all other topics which tend to go down this road.

Don't reply to me here, I wont respond. email me ([email protected]) or pop in to EZ-Chat (I'm usually in there although sometimes AFK). And if you are going to attempt to make claims about things I've said or done at least have the decency of linking to the specific posts.

JUST like you DOT KNOW ME RICH,you know notthing about my experience AND you are picking on me,IF one post ok or 2 or few,but almost every post i made lucky if only one you said i am right.

SAID BACK A FEW POSTS AGAIN I ORDERED A USB WIRELESS DONGLE

AND should not cuss,i never said a bad word in my post and i dont think anyone else did.

this is a friendly forum not a fighting match like you are looking for

NOT once did anyone said my posts or designs dont worK

Aleast one thing the video will show it WORKS RICH says like the word h**l or going to cry (wow) or bang his head against the wall,or going to rip my head off and beat sense in to it,NOT one person in this forum uses cuss words

Doesnt matter if you dont agree with someone you should get mad and keep to your self

Sounds like a very angry person,maybe since i know know him ,he drinks or has many fights

ONE thing about me i never get upset,cuss or cry or fight with anyone ,once a awhile back a guy hit me.,i turn my cheek and say hit the other side and it work not once do i drink or get into a fight

this forum is about robots and should a friendly forum,no cuss words or anything else

WHEN I POST MY VIDEO guys it will show on how i did it

sorry everyone about the problems ME and RICH is doing

NEXT post i will not answer RICH at all,i just post my idea and post a circuit or video ON how it works

AND if it doesnt work not a problem too,i will say it doesnt work.But atleast i will test it.

SO far this was a good post by me and i got part of it working,next is control both of them,witch i think it may work with a very good help from my network guy that did work for company who makes and builds wireless and wifi routers and cards,he is a software engineer and a hacker,only will NOT hack anyones computer unless its OK with them.

SO thats where i get all my info from,not from a person i dont know,NOW RICH MAYBE RIGHT but he doesnt know anything about my friend

RICH i will never ever email you and please do not email me,in your photo you look about under 30 my network guy is 47 to 50,and know way more then you do,you can still say you know more but you dont know him and you thing your never work for company who makes software and hardware for networking

Second point i dont know about you,but i do know he is in the networking field for 20 years maybe more ,I help me for that long may be little less

anyone else can ,your will go to spam folder,

Can post again on the topic i cant stop you.but i can not answer you a ny more

So wont be any more fighting from you

ONLY for others i will post the video,if cant or can get it to work. i know i will find a answer to make it work

and on the networks correcty me only one post WINDOWS 7

Man, you need to learn to stop arguing with people when their not arguing with you, just focus on the build. Looking forward to seeing an on topic post for this build soon.

IT SEEMS LIKE HE HIS,why RICH needs to comment on very post i do not know it does take two to argue,he says i am wrong

BUT BEST is i will never ever answer him again,he can post all he wants and make and comments he wants.on any topic,i just say my design MAY or MAYNOT work after i test it.

And finish this project and POST A VIDEO

Very simple way not to argue any more WITH HIM he can post info his very bad temper needs to stop ,that i do not like,if he doesnt agree with fine ,great

Never see me get upset ever in any of my posts,NOT ONE EVER