Pi Compatible SBC Holder
![Pi Compatible SBC Holder](/uploads/EZBits/81315b09-f78a-40aa-8fe3-c03f2b1ae226.jpg)
This is a base holder for a Pi compatible-formfactor SBC, such as the Rock Pi/x and Up Board. For SBC's, such as the Rock Pi/x, the heatsink is at the bottom and heat rises. On a robot you'd most likely use risers to mount the PCB upside down. However, on your desk or a temporary robot installation, this allows the PCB to sit upright to allow the heatsink to cool.
- Author
- Synthiam
- Certified
- Yes
- Date Added
- 3/31/2021
- Category
- Bodies - EZB v3
- Author's 3D Printer
- MakerBot Replicator 2
- 3D Printer Layer Height
- 0.100mm
- 3D Printer Shell Count
- 2
- 3D Printer Infill
- 15%
- Estimated Print Time
- 1.0 hours
- 3D Printer Material
- PLA
- Revision
- 0.0
STL Files
![STL File](/Uploads/EZBits/STLs/72d8e78f-eded-46cb-ade7-d8b097f4d66f.jpg)
Here are some photos of how it can be used with the rock pi/x. This lets the heat sink vent correctly