EZ-Robot Inc

Humanoid Body

The Humanoid Body is a stable robot platform to begin building your own robot. It has enough internal space to house the EZ-B v4 WiFi Robot Controller brain, one LiPo Battery 7.4VDC 1300mAh and...

Servo Gripper

The Servo Gripper can be added to any EZ-Bit connector allowing it to grab objects. The Servo Gripper includes a strong metal gear servo to hold objects tight.

Dodecagon Body

Begin your robot build with this versatile dodecagon dome shell as the main body. 13 female EZ-Bit connectors provide enough options to add several EZ-Bits legs, wheels, arms, cameras,...

Female Clipnplay Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for screws to mount to your custom robot...

Male Clipnplay Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for screws to mount to your custom robot shell,...

JDs Microphone

The microphone used in the dancing JD videos where he sings "You Haunt Me" from the demo app. As seen in his famous <a...

Lego Male EZ-Clip

This Lego adapters has a male EZ-Clip. Connect Lego parts to your EZ-Robot.

Lego Female EZ-Clip

This clip has a Lego attachment to connect Lego (tm) parts to your EZ-Robot. The EZ-Clip is a female.

Iphone 6 Holder

This will hold an iPhone 6 or iPhone 6s. There are two EZ-Clips to attach servos for X/Y Gimbal control. There is one clip on the back and one on the bottom.

Iphone 5 Holder

This will hold an iPhone 5 or iPod Touch. There are two ez-clips to connect servos for gimbal x/y control. One clip on the back, and one clip at the bottom.

Iphone 6 Plus Holder

This is a holder for an iPhone 6 Plus or iPhone 6s Plus. There are two EZ-Clip connectors to attach servos for X/Y gimbal rotation. There is a clip on the back and a clip on the...

JD Hip Assembly

This is a hip assembly that contains two servos for JD.

Gopro Adapter

This adapter will give your GoPro Camera case the power of ClipnPlay.

Continuous Rotation Servo

A continuous rotation servo will rotate 360 degrees, rather than the 180 degrees of a regular servo. These servos are also called Modified Servos. With the addition of a...

Rover Body

Roli is a very customizable planetary rover styled robot platform with 13 female EZ-Bit connections for additional EZ-Bits. Much like a space exploration vehicle, this robot was designed to be a...

EZ-B V4 Camera

Give your EZ-Robot the gift of sight with crisp 640x480 resolution. The EZ-Robot Camera is capable of color tracking, objection recognition, facial recognition and more. This camera connects...

Rotation Servo

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay connection that rotates 180 degrees. The metal internals will withstand a high load. Up to three EZ-Bit accessories can be added to...

Hexapod Dome

This is the dome which connects to the Hexapod Body. It covers the EZ-B and has a female EZ-Bit on the top - which we recommend to mount a camera.

Ultrasonic Distance Sensor

This is a distance/range detection sensor which also includes our innovative low energy switching power supply. The sensor uses ultrasonic sound to determine the...

RGB LED Block

This RGB LED Block includes 18 RGB LEDs. The LEDs can be sequenced using the EZ-Builders RGB Animator Control. Each LED can fade into different colors with transitions with your custom...

Extension Cube

The extension cube allows multiple EZ-Bits to be connected to a single location. If you wish to connect more than one servo, this is your component! This bit hosts 3 female and 3 male EZ-Bit...

EZ-B V4 Wifi Robot Controller

The EZ-B v4 boasts 200mhz of 32-bit Processors (ARM Cortex M3 & Microchip PIC32) , 5 Volt Tolerant I/O, Energy Efficient Digital Switching Power Supply, Wi-Fi...

Extension Block

Very useful extension that is the same length of a Clip n Play Lever Servo. This allows you to extend an arm to get to hard to reach places. There are a total of 9 female connections and 1...

Rover Can/Bottle Holder

Add a can or bottle holder to the rover chassis

Lever Servo - 45 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will withstand a high load. Dream up new robot...

Lever Servo - 90 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will withstand a high load. Dream up new robot...

Lever Servo - 0 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will withstand a high load. Dream up new robot functionality....

Lever Servo - 180 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will withstand a high load. Dream up new robot...

Lever Servo - 135 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will withstand a high load. Dream up new robot...

Humanoid Head With Camera

Add a Humanoid Head to your EZ-Robot so it can recognize its surrounding and display emotions. Includes a built in 640x480 resolution camera for vision tracking with the...

Humanoid Left Foot Assembly

Add a unique method of movement with humanoid legs. Simply attach this Humanoid foot assembly to any female Clipnplay connector. It includes two Heavy Duty Servos...

Humanoid Right Foot Assembly

Add a unique method of movement with humanoid legs. Simply attach this Humanoid foot assembly to any female Clipnplay connector. It includes two Heavy Duty Servos...

Hexapod Foot

The Hexapod Foot attaches to a female ClipnPlay connector of a servo. Use this foot on your Hexapod, or be creative and use it like the Scorpion Kit

Power Shell

The Power Shell is a holder for your EZ-B v4 WiFi Robot Controller. The power shell enables use of your EZ-B v4 on the desk rather than inside of a robot body. The power shell contains a 20 amp fuse...