- 2012-06-23 - joined Synthiam
- 2012-09-24 - created first new question
- 2012-10-08 - joined your first forum discussion
- 2014-10-05 - shared your first photo in the forum
- 2014-10-12 - posted a robot project showcase
- 2014-10-12 - created a custom avatar
- 2014-10-14 - attempted to help a fellow robot builder
- 2014-11-13 - connected ARC to the cloud
- 2014-12-13 - shared your first video in the forum
- 2017-03-18 - answered a forum question
- 2021-11-27 - subscribed to ARC and unlocked new features that make your robot even smarter
- 2021-12-01 - used the Bing Speech Recognition to convert spoken speech into text
- 2022-02-22 - started first conversation
Questions (53) Robots (4) Skills (0) General (1) Hack Events (0) Tutorials (0) Apps (0) Firmwares (0) 3D Parts (0) Feature Requests (1)
MPU9250 Accelerometer, Gyro, Temperature, Compass Upgrade Request@DJ, I know I have this open under feature request, How hard would it be to use the...
T265 Realsence Viewer.Exe On An UpboardHi DJ. Have you tested an Upboard Using the realsense Viewer.exe file for the T265. and was able to run the realsence program on the Upboard?...
How To Open Your ARC Project When Windows 10 Boots UpHello all, Back in the day someone show me how to open your ARC project when your pc booted up. Does anyone...
Will The 3 Wire Grove - Ultrasonic Distance Sensor Work On The Arduino MegaHello, I am trying to free up many digital ports on my arduino mega...
How To Use Neopixel Ring With Arduino Mega@DJ, can you use the arduino mega with a neopixel ring without using an EZB? thank in advance cheers
My EZ-B V4/2 Wi-F Has Steady Blue Light And Say Connection ErrorMy EZ-B v4/2 Wi-F has steady blue light and say connection error. Tried reset button but it...
Extension From Ezrobot Camera Lens To The ModuleLooking for an extension from the camera lens to the module board. I was hoping for maybe a foot to 2 foot long maybe a...
Off-Topic From Springfield OregonWe were not in the totality of the eclipse but pretty close in Springfield Oregon. here's the last picture I got before it started getting bright again....
Help Connecting A Neopixel RingHello all, Has anyone used a NeoPixel Ring before. I can't figure out how to wire it or connect it to EZB. Here is a link to the NeoPixel Ring site it has a...
What's If The Pistol?
Let One Storm Trooper InIf you let one storm trooper in, the Death Star will be at ARC soon! :)
Getting This Error When Opening Ezb ProjectCan someone tell me why I get this message when I open my EZB project? Thanks in advance.
Lol, Good Bye Old Place
Ezb CameraWhy would EZB sell a camera that is not focused? Then have a learn section that explains how to focus? Because of this I have broken my new camera that cost 59.00 and will not be in warranty. @DJ, can...
Ezb V4 Wifi Controller Failed Again. This Is My Second Ezb That Has Failed. AnBack in Dec, 1024 I received an EZB that worked for about 4...
Finger Tip Sensors For Inmoov Hand@Richard R. Are you going to use the finger tip sensora on your inmoov? I'm printing a new hand and would like to make use of the sensors but I don't...
Adc To Move Jaw New SoftwareHello, I had a working JAW/mouth working with older software. I upgrade to the lastest software and can't figure out how to sync the jaw using a analog to digital...
520Tvl 0.008Lux Color Video Mini Cctv CameraIs it possible to connect a cctv which only has 3 wires pos. grn and video directly to the ez-boaed to by-pass using a USB to your...
Bluetooth Disconnects If Left On All NightHello all, I have learned a lot reading everyones posts. Does anyone else have this problem with their bluetooth disconnecting. I have...
No robot skills. Click here to view the Robot Skill Store.
Merne's 2Nd Inmoov BuildSo I started my second Inmoov without a name yet. I haven't given up on Gideon, my 1st Inmoov, I have learned a lot from my first Inmoov and will apply it to my 2nd Inmoov....
Merne's Inmoov With A Slight ModificationThis Inmoov is a big project for an armature like me. I have lots to finalize and complete. I will be starting to add scripts in EZB4 to...
Merne's Gideon InmoovI have not been here for sometime been busy with that dirty word, work. I have ,however, been redesigning my bottom half of Gideon. I have been gone so long I have forgotten...
Merne's Mo, My InmoovI'm finished building my Inmoov, Mo. Finely! Almost, waiting for a new EZB4 to power Inmoov's head. Still have lots more to add to him. I shortened the neck part to fit the big...
No live robot hacking sessions. Click here to view the past live robot hacks.
No user tutorials. Click here to view all user tutorials.
No robot apps. Click here to view all user robot apps.
No firmwares. Click here to view robot hardware and firmwares.
No 3D printable parts. Click here to view 3D printing robot library.