hoolagen1

4 In 1 Sensor .99 On Amazon

yep, just found it. hope this isnt old news. :) :) :) 4 in 1 for 99 cents!

Coachella 2014

Whis going? Come on guys I post these every year.

Troy, 2022 In Qatar

check it out the world cup! troy will you still be there in 8 years? haha! fifa in qatar

Clip And Play For Micro Servos?

Hello, Just curious to see if the same clip and play parts will be available for micro servos. gracias.

Relative Servo + Invert Option Question

can any confirm the relative servi control is working properly? please. i can get it to work but when i try to invert the motion one servo goes dead ive tried clicking on the invert on both the master and seondary servo but nothing.... ive tried doing the multiple servo control and inverting there, same result. i guess i can write a script, but...

12V 1500Mah Battery Vs A 7.2V 2200Mah Battery

i thought i should be looking for a battery with high mAh (2200mAh) vs high Voltage (12v VS 7.2v) i see a lot of people getting higher Voltage with lower mAh, and having to add a voltage regulator or something. wondering if there are benefits im missing in reading all the posts. Im a noob...can anyone clarify?

Ultimate Wall-E For 250.00? Whaaaaaaaaaaat!

So yeah im contantly looking for these....1200 on amazon and 750 on ebay but i googles searched it under shopping the second item 250.00 i went to the website....look sok i guess.....did some research on it, couldnt find anyting bad...they do come from china, not sure if that matters... What do you giuys think?

This Is Me, I Called Dibs....

ultimate wall -e ebay no remote...

Coachella 2012, Done.....Back To My Wall-E

Hello Guys :D Back from the madness, i managed to spare some brain cells and have 2 more days off of work......wall-e will be done!

Coachella 2012

anyone going? be really cool if you did, man... black keys radiohead snoop and Dr Dre

Ezb Mp3 Trigger Misc. Control Not Working.

Hello, When i test my mp3 trigger with the ezb software: only control i have on the screen is the mp3 trigger board it works fine.... but when i open my saved file with all my controls and sensors and everything.... the mp3 trigger board doesnt work anymore....i can manually play tracks froim the mp3 trigger it self but if i try to assign commands...

This Really Freaking Blows

to be honest i think its the camera...the entire set up started acting like this once i integrated the camera feature.... I AM SOOOOOOO BUMMED OUT.

Controlcommand(Scriptstart, ) Help

help guys. im trying to figure out how to activate a script by voice control.... i go to script, type in servo(d19, 30) servo(d19, 50) i hit repeat and name it shoot then in voice command or personality generator i type controlcommand(startscript, shoot) ezb tells me shoot is not a valid wondows command..... what am i missing, cuz i know its me and...

Does The Camera Have To Be Attached To The Servos That Move It

hello Had an idea, since my wall e has a bunch of servos and light in his eyes, i wont be able to install my ezb cam in the head.... i was wondering.... if set up the camera above my monitor (stationary, separate from my wall-e) and i assign the wall-e neck servos (neck left and right and neck up and down) to the camera will wall-e head move (as if...

Script Help Please. How To Move Multiple/Relative Servos At The Same Time?

Hello, i am working on scripts to add to my personality generator, to make wall-e awesome. I am trying to do a , flashing eyes script i have to move 2 servos(one in each eye) to move up and down at the same time. and the tilt feature by Glickclick (uses 2 servos to make wall e tilt forward by voice control (script) how can i do that? i see...

Voice Recognition Help...

Hello, Making great progress on my wall e.... I purchased a microphone for the pc and cant seem to get voice recognition to work. I have followed the instructions, set the volumes and levels.....uv meters reads my voice at mid way like Sures intructions show.... i think i have the microphone set up correctly but form some reason the speech box isnt...

New Arduino Sensors....Little Help

Hello, I just picked up some sensors for my wall-e 1 parallax ping sensor 2 parallax PIR sensors and 1 china maid smoke sensor (cool right?) All sensors have 3 pins coming from them, I also bought a bunch of female to female servo cables...so i can connect all sensors to ezb with no soldering. the parallax sensors, i feel will be pretty straight...

Arduino Infrared Module Kit As Table Top Edge Sensor?

in the video below i think the guy is using the arduino infrared module kit (link to ebay item below too) i wanted to see if anyone here know if we can use this kit as edge detection. so my wall-e doesnt fall of the table. in the video it shows that if even one sensor (either the transmitter or receiver ) go off the table the bot stops and...

Glickclick!!! Where Are You! Quatar, I Know, I Know....

yo! long time no talk....lets see for progress...i was able to do the body titlt...i will post a video tonight...(california time) thanks for your help man. i hope all is well and i hope to see some updates from ya soon. Carlos

Ok Guys, Let Me Have This One.....Please

i just bid on it, ends it 2 days....come on! LINK!!!

Female To Female Servo Cable?

Hello, making tons of progress on the wall-e. To the point i am now getting close to start adding sensors. I purchaed motion detection ir sensors and a 3 pin ping sensor. from radio shack Since i dont have any, and i mean any, soldering skills....can i just use a female to female cable to connect a sensor to the ezb? i found a female cable with no...

Can I Place A Modified Servo On The Wall-E Wheels Instead Of Body?

Hello, I see most people attach the modified servos to the wall-e body then attach the wheels to the servo can i attach the modified servo to the wheels and then attach the wheels to the body? have some ideas in mind, and wanted to see if anyone has experimented with this? thanks,

Will This 8Aa Battery Holder Work For The Ezb?

8 aa battery holder Since i got hte eb form a diff. website, it came with no power supply... Sures states to use a 5aa battery holder, will this 8aa work? until i get 7.2 6800mah battery pack thanks guys carlos

Received Ezb Today!

so happy, never done any thing like this and boom!, im controlling servos and wall-es coming to life. thanks and im sure ill be on here a lot more, sooooo excited one questions...upgraded software and connected without a problem. gut, my led is red.....in all the videos its blue? and....how do you reboot the ezb? pull the power? when i updated the...

Buying An Ezboard Where Can I Buy Power Cable ?

i know sures sells the power adaptors.....but i dont have the patience to wait....i want to go to my local frys and get everything i need in his videos he shows a battery pack full of aas how does he actually connect that to the ezb? how do you mod a cable to do that? and what cable? sorry if im not clear carlos

Digital Vs Analog Servos

Hello, Can i plug in an analog servo into one of the digital ports? I ask because there are way more digital ports than analog ports. I know an analog ir sensor and a ping sensor are for the analog ports only, right? I want to buy analog servos cuz they are way cheaper, but there are only 9 analog ports. Thanks. Carlos.

Do You Guys A Approve?

3 servos, for arms and neck 2 micro servos for head and eye tilting servos for wheels ir sensor do you think these are good options for my wall-e.....since im not buying the kit from Mr. sures i wanted to make sure all the parts im buying will be compatible not only with the ezb but will be sufficient for the wall-e project. im not sure if the...

Full Length Disassemble Videos...

Hello DJS, in one of the wall-e videos, the end is the disassembly of the the wall-e Do you have the full video? Really what im looking for is the disassemby of the eyes, i wan to know if i can keep the original eye tilt motion and insert a webcam in one eye.... sorry for rambling Carlos

Any One Have A Spare Wall-E?

I missed out on the recent wall-e with no remote on ebay.....now prices are at the cheapest $80.00 I cant pay 80 for a toy im going to break. I just cant...... help?