Zxen
Country: Australia
Member Since:
Achievements
-
2015-08-20 - joined Synthiam
-
2015-08-20 - created first new question
-
2015-09-11 - connected ARC to the cloud
-
2015-09-13 - joined your first forum discussion
-
2015-09-13 - attempted to help a fellow robot builder
-
2016-05-19 - shared your first photo in the forum
-
2016-09-16 - posted a robot project showcase
-
2016-09-23 - created a custom avatar
-
2017-01-31 - shared your first video in the forum
Latest submissions
Questions (14)
Robots (2)
Skills (0)
General (0)
Hack Events (0)
Tutorials (0)
Apps (0)
Firmwares (0)
3D Parts (0)
Feature Requests (0)
question
Vuzix 2016 Compatibility
Ive explored the forums for headset info but the answers are not solid and seem outdated. Is there an up-to-date list of which headsets are compatible with the EZB and ARC?...
12
3 k
Nink |
question
Ezbv4 Modifications
I have needed to reduce the size of my EZB because it did not fit nicely in my robot. So I removed the power base. Unfortunately, desoldering the power terminals from the EZB wasnt...
25
4 k
Toyhackrobotic… |
question
Camera Head Tracking
I need to extend the camera from its circuit board and mount it in something like a cable dot on the side of the head facing forward. At the moment she looks borg. Not good. This...
61
6 k
DJ Sures |
question
Soundboard (Pc)
What is the Soundboard (PC) window for? There is no editor. Obviously I want to choose this one rather than (V4) because the sound is better. I want my robot to dance to Vogue by Madonna.
12
3 k
Mac |
question
Soundboard - Getting Mp3s
www.loudtronix.me automatically converts youtube videos into MP3 sound files for you so all you have to do is click Download. I highly recommend it.
0
2 k
Zxen |
question
I2c Servos Instead Of Pwm Servos
Im developing new servos with a mechanical engineer and weve decided to make them i2C to reduce the number of internal wires per module. How do I run ARC...
10
4 k
DJ Sures |
question
How Can I Plug These Servos Into The Ezb?
How do I plug these servos into the EZB please? http://www.active-robots.com/high-torque-dc-servo-motor-60rpm-with-uart-12c-ppm-drive
7
3 k
Zxen |
question
Can We Buy An Ezb Camera With A White Lens?
The black plastic around the lens of my EZB motion tracing camera is an eyesore on my white robot. Also, it is only 640x480. I assume...
1
2 k
DJ Sures |
question
What Is The Best Remote Control Solution For My 30Dof Robot?
Hi there, I would like to control my Humanoid Robot (custom robot with 30 degrees of freedom - 2...
5
2 k
Zxen |
question
Short Circuit / Melted Fuse
I have been blowing the 20A fuse of my EZBV4 power base while plugging in servos. I just figured out why (and Ill tell you why Ive been making a stupid mistake): I...
1
2 k
Zxen |
question
I Have Just Decided To Try Replacing All My Servos With Steppers
Can someone please tell me everything I need to buy to replace my servos with stepper motors...
20
5 k
CochranRobotic… |
question
Ezb V4 Turns Itself Off Whenever I Send A Command
Every time I move a servo through WiFi the ezb v4 makes a chime like its starting up but its really disconnecting. I tightened the female connectors (I dont like the dean prongs - the base doubles the size of the unit for no reason). I thought this might be due to the 6V20A power supply I had begun using instead of 7.5V48A I was using previously...
29
4 k
thetechguru |
question
Servo Power Source Questions
Hi, My first question is about whether or not its fine with 24 servos to twist all the red wires together and all the black wires together so you end up with 26 wires - 24 data + 2 power. I will use a 7.5V46A power supply to provide power to the servos. The data lines will hook into my EZBV4 Microprocessor. It seems like the obvious answer is of...
4
2 k
CochranRobotic… |
question
Orientation Sensors To Create Intelligent Servo Feedback
Hi, Can the Orientation sensors be placed on each servo motor so that you can move robot arms into place and save a frame without needing to use screen controls? I want to be able to easily move the arms, head etc into each frame/pose to create specific choreography.
12
4 k
Zxen |
No general conversations. Click here to start a conversation.
No robot skills. Click here to view the Robot Skill Store.
No live robot hacking sessions. Click here to view the past live robot hacks.
No user tutorials. Click here to view all user tutorials.
No robot apps. Click here to view all user robot apps.
No firmwares. Click here to view robot hardware and firmwares.
No 3D printable parts. Click here to view 3D printing robot library.
No features requests.