The Robot Program Episode 009: Getting Six to Move
This lesson will demonstrate how to connect to and move the Revolution Six robot. Follow along with The Robot Program Episode 009: Getting Six to Move. At the end of this lesson, the reader will have learned how to connect to the robot using Wi-Fi, how to move the robot, how to track the default color, and how to use the Auto Position and Soundboard controls to execute movements and routines.
View the video episode here: https://www.ez-robot.com/Tutorials/Lesson/35
This tutorial uses the following controls:
Professor E's Overview
This lesson demonstrated how to connect to Six for the first time.
Remember to start with a fully charged robot. Load the Example Project for Six and connect to the robot using Wi-Fi.
Use the Auto Position and Soundboard controls to execute pre-built actions and routines. Use the RobotScratch workspace to create a linear program. In the Camera tab, enable color tracking and the robot will track the color red. Remember to disconnect, power off, and charge the robot when finished.