ARC Pro

Upgrade to ARC Pro

Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.

#1  

I normally use my imaxB6mini to charge my LiPo batteries. Having both a "Main Lead" and "Balancing Lead Ports".  Being that the "Main" battery lead is tucked away in the body of JD and only the "Balancing Lead" is accessible, can I still use my imaxB6mini's balancing port to charge the battery without connecting the Main lead?  Thank You...

PRO
Canada
#2   — Edited

[color=#442e5f][size=3][font=OpenSans, -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, "Helvetica Neue", Arial, sans-serif, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji"]I looked at the manual for the iMaxB6 mini charger and it operates the same way most RC multi-chargers work, the charger does need the Deans connector plugged in to charge the LiPo cells. The Deans connector is designed for high current charging that can't be done through the balance plug. In most cases the balance plug is used for cell monitoring.

[color=#442e5f][size=3][font=OpenSans, -apple-system, BlinkMacSystemFont, "Segoe UI", Roboto, "Helvetica Neue", Arial, sans-serif, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji"]The EZ-Robot charger does a balance charge but it does not need the deans connector plugged in. It can use the balance connector for charging since it is a low current charge. I would recommend using the EZ-Robot charger with use of JD. The alternative would be having to connect/disconnect JD's internal power harness in order to access the deans plug, which would be a very laborious process if you did this for every charging cycle.[/font][/size][/color][/font][/size][/color]

#3  

Jeremie, thank you for your responding to my "I should know that already" question.  I have a charger that is compatible, but I just am not a battery charging engineer and it didn't make any sense to me. You have "LERNT" me some knowledge! And yes I did take JD body apart, just because that's what we all do, we just gotta look inside!

PRO
Belgium
#4  

howmany amp's does the charger give ? the one we use today?

thanks

#5  

Here's an idea... flip it over and read the back of the charger...

PRO
Belgium
#6  

on the metal charger is all info not on the plastik one.

i can charge the batt with the metal one.it takes a little longer.

thanks RR

#7   — Edited

I have 4 of the most recent (plastic) chargers... All have their electrical specifications printed on the back...

Photo User-inserted image

PRO
Belgium
#8  

that is correct.i have a metal one too. the plastik one have a label in front.but i dont understand it. how to read them. anyway problem is solved.i can use the metal one.

thanks RR

#9   — Edited

Quote:

but i dont understand it
No surprise there... The picture I uploaded is the back of the charger.... All of them have this sticker on the back unless someone peeled it off...