You may have seen this video of a real large ez-robot hexapod...
That is a robot i built over the summer at my cabin with a 3d printer for the Intel IDF16 conference in San Francisco. It was meant to be powered by an Intel Joule, but I threw an EZ-B v4/2 Wi-Fi Robot Controller in there instead :D
For those interested in making their own, the servos were the costly part. The servos i used were very heavy duty: CYS Digital S8218 servos. Which are 38kg/cm at 7.4v! They're incredibly large as well, at 59.5cm x 29.0 cm x 55.2 cm.
Here's the STL files to 3d print your own:
- Foot.STL
- HexapodBodyBatteryCover.STL
- Hexapod Body Bottom.STL
- Hexapod Body Top.STL
- Hexapod Dome.STL
- L Bracket.STL
- U Bracket.STL
You can see the difference in size compared to the regular Six Hexapod
By DJ Sures
Other robots from Synthiam community
Bhouston's Inmoov's New Gripper
I found a design for a robotic gripper on Instructables, so I thought I would make one for my InMoov. The basic design...
Rb550f's Okio J5 Style Robot Project
This is OKIO J5 style robot made from an upright vaccum cleaner. The head i made from a dremel accessory toolkit and led...
Ezang's Happy Crawler 5/18/2021 And New Combination Robot...
Metal legs adjusted to walk A short Video for now, Servo City Parts, 4 servos, ARC programming - IoTiny, Battery,...