Ask Synthiam For Help

These are questions from people requesting assistance to build and program their synthiam powered robots. Experienced members are here to help because we're all focused on the same goal... building awesome robots!

question
can't connect to network
can't connect to network
HiI have a JD humanoid robotfully charged -  flashing green on backwhen I turn it on it say something like go to the website and the...
question
Inmoov bicep servo question
Inmoov bicep servo question
Hello all! First of all I want to thank all of you for your support with inmoov/ezb. It has been very helpful to me to this point in my...
question
new robot need help
I just received my new JD robot humanoidFirst I charged the batterysecond - I plugged the battery with the controller together, it come on saying welcome and go to the website - the on and off switch does nothingjust stays on - I never had a chance to even set it up yetwhat to do?Angelo
question
Folger...
Folger FT-6https://folgertech.com/products/folger-tech-ft-6-3d-printer-kitI am interested in this printer kit, I have seen many using his...
question
Motor/ Servo help
Motor/ Servo help
Hello All,I am currently using the EZB4 for my 54 biped robot. The robot weighs 13 pounds. And I need help picking out the correct type of...
question
Auto position Control window Rename
Auto position Control window Rename
Hi,   I am having a brain fart and can't remember how to rename an Auto position window? I've done in the past but just can't seem to do...
question
I am...
I am trying to control my Dynamixel AX-12a with the EZBPi, but when I try to connect EZ-Builder it disconnects shortly after...Is there a...
question
error in mobile app
error in mobile app
i just downloaded the new version ez builder.and it has an error in the mobile app.the windows for get temp and get voltage are showing an...
question
Has anyone built a shoulder, arm and hand other than the Imoov design. I am looking for something with more strength. I want to get away from the cable design.I have linear motors and stepper motors and want to use a more direct mechanical design. Any ideas?
question
Project Suggestions?
Project Suggestions?
Hey Forum,First off, I changed my name again, and hopefully for the last time. (Previously Technopro, MazeHorizon0) Cardboard hacker is...
question
How do you...
How do you delete controls or duplicate controls out of ez builder?
question
I saw that...
I saw that last year somebody had built a wheel chair robot and I am having trouble getting around in this new Forum. My idea for the new...
question
I have been trying to find 3D prints files on  Sythiam. I can’t find them. Help. Also is there a way to go back in the Synthiam web site. I drill down to something and then have to go to categories and start over. This includes sometimes re-entering a search again. Also can’t just push enter but have to go up and select search.Am I missing something?Ellis
question
how can i...
how can i loop the image?without connecting&disconnecting.when i press the connection image,it plays an mp3 file from a cat and connect.but...
question
i have a...
i have a question.maybe its a easy one but i thougt it was best to ask.so i made the mini meccanoid with the head of robot MAX.am using two...
question
I have been looking at these new Disney animatronics, thought you might find it interestinghere is a youtube  viewinghttps://youtu.be/bFU9Qg_6EsYhttps://techcrunch.com/2017/07/17/disney-showed-us-the-inner-workings-of-its-avatar-robot-and-its-just-incredible/Angelo
question
Hi AllI have a sabertooth 2x32 which will run using the standard movement panel and coded scrips. This means I have no control of the speed unless I change the code or the ramps in sabertooth.When I use the sabertooth movement panel only one motor drives forward and sometimes not in reverse. I read that this movement panel needs some changes, but how to config the panel is past me.Can anyone help?
question
Hi,...
Hi, looking for help combing AIML with Speech Synthesis? Basically I want to be able to use a mic and have a conversation with my robot and...
question
I started...
I started my robot today that sports 4 v4 EZB's (one is an IOTiny) then started EZ Builder up wanting to show him off to guests. None of the...
question
Hello,I have used servomotors from a developper kit (with EZ B 4) on a small robot and it works OK.Now I want to use GM9 motoreductors (Solarbotics) instead.So a got an EZ B H-bridge and noted connections used for Roli.But I suppose that I have to add some protections between the EZB4 and the H bridge ? Or elsewhere,  so that no dammage happens . For EZB4 or H bridge.What is necessary?Thanks to help a beginner.Cats92
question
Will a single  autoposition control ever be able to access multiple EZb's/IoTiny?  For example I have 2 IoTiny's ,one in each arm of my inmoov operating the fingers, wrist and elbow.  Right now I have to use 2 autopositon controls and then make a script to try and tie the action together. It's a little counterproductive.
question
Is there a...
Is there a build of EZ-builder for Debian?I would like to know because I just put together a Debian laptop
question
Hi, I have...
Hi, I have the remains of a Robosapien v2 robotjust wanted to know if it is possible to activate again with the controller and batteryhere...
question
Hi, 

I...
Hi, I purchased in Feb. 2019 a new JD robot, just used a few timesYesterday, I was doing the servos profile, the robot twisted up and said...
question
Has anyone used this module? NEO-M8P-2 , it is avail for about 86 dollars not and it is RTK next generation that can kalman filter gps readings into a finer group and also connect to other NEO-M8P-2 to establish a point of reference for centimeter accurate positioning.  I would like to get these into a outdoor robot so that I can setup a geo fence and maybe have a better lawn mower bot as well.  I would gladly buy and send one to EZ-Robot /...
question
I have...
I have calibrated the Continuous Rotation Servos on my Adventure Bot according to the tutorials and all the tests work as expected. But I...
question
tik tiki have an original iotiny whit speaker that has a tikking sound.i tested 4 speakers,all has the tikking sound.nothing is connected like servo or cam or 12c.there are no screws in the iotiny.how can i solved this.
question
Control UBTech Alpha Servos With The Ez-b V4?
Control UBTech Alpha Servos With The Ez-b V4?
Hello, I have a question .I have these servos in my robot and have now bought the EZ-B V4.But if it does not get to work, can the Ez b...
question
Are there any Bots, that get on the net, EZ robot can use?thanks Angelo
question
i have a...
i have a problem whit the rgb.excample spin roll stops while spinning.also i hear a tikking sound.i disconnected the servo&rgb.tikking still...
question
Help With Serial Bus Servo (almost Dynamixel Protocol)
Help With Serial Bus Servo (almost Dynamixel Protocol)
I would like to get some help on serial bus servo's that use almost the same protocol as dynamixel.BUT all the dynamixel instruction packets...
question
Help With Error On $botresponse Aiml
Help With Error On $botresponse Aiml
Quick question as I am editing the settings file for the AIML Bot plug in. I got a clean set up with just the AIML Bot plug in. Mostly works...