Thank you very much! That is so nice to hear! I'm sure everyone here will love to read your kind words in reward for their hard work :)

We recognize the font size with the port labeling. I have probed Jeremie a few times on how we can address that. To keep the board as compact as it is, we have had to accept the small font.

So, in my response to address the font size concern... ARC now has a graphical port selection menu. When selecting ports, it now shows a physical view of the EZ-B v4. This means you can visually see where the items are connected to the respective port.

I have also added the Port Summary configuration menu in Project Details. You can read more about it on this page: https://synthiam.com/Tutorials/Help.aspx?id=1003

Ah ha! Just connected a servo and added servo Movement Panel and I see the graphical port selection menu! Perfect solution! Fantastic!

fxrtst, Do you have current projects you are planning to update and share with the EZ Robot community? Looking forward. Glad you received EZB4. Steve S

@Steve,

Like Dave Schulpius, I have a B9 I started 10 years ago. But because of daytime work, a new family, I think its probably going to be a retirement project (I'll be able to add in the new v10 EZB by then). Here is a link to what i have completed on my robot from about 2009.

As for other projects, again time permitting, I'd love to do a robot in the 3d print library. But probably would not be until after the end of my Kickstarter.

B9 Progress

fxrtst, I found your video. What determination, with a great longing to achieve such a personal desire! Thank you for sharing such a great project and video. Your professional work is evident! I am glad to be part of this great community. Thank you, Steve S

@fxrtst - I'm glad you're back home safe and sound. Look forward to more updates.

Thanks! So am I. It really is a great community.

I'm so jealous of the way your B9 arm works in that video. I hope mine turns out half as flexible and responsive. ;)

Thanks Dave. Hopefully I will get time to work on it when I get the Kickstarter done. Would love to figure out the rest!

I loved reading this! I am excited to see what you do with your new EZB v4!

@aislinn , you'll be the first to know! ;)

Thanks for sharing the video! Great job on your B9 robot.

Look forward to see what you do with the v4 controllers.

:) J

@fxrtst - Thanks for the kind words! We can't be happier about all the support and positivity coming from this first initial batch of v4's shipped out. It'll be a flood of awesome on here once all the orders have been filled! :)

Great work @fxrtst! Keep it up :)

@alan, Words well deserved for you and the team. I feel honored to be one of the first to install and use the ezb v4...again a job well done.

@Jason, Thanks !

A knock on the door this morning and surprise, surprise, Australia Post delivered my Ez-Robot development kit in a tiny box. It arrived a week earlier than Canada post's estimate, but I'm NOT complaining! The whole kit plus a few extras like a Lipo battery and charger was in there, all tightly packed with tons of bubble wrap and foam pieces First impressions is one of quality, everything looks & feels good. Lots of extra bits included that I worried would not be there. The charger has a set of plug adapters incl the Aussie one - hooray! The Ultrasonic sensor has a voltage regulator neatly wired in The EzB V4 and camera are incredibly tiny. The 3D printed case is good quality and fits nicely together What really impressed me was the "Made in Canada" sticker on the EzB bag, along with the Inspection Certificate for the board. I immediately had visions of the EzB team beavering away hand-making the first 100 boards for the lucky few which I deeply appreciate.

I had a few hours to spare today but I didn't know where to start! I sat there for a long while just inspecting all the goodies. I eventually set up a power source and tested the board. The wifi AP mode worked immediately but I stuffed it up when applying an 8 character password (which it somehow did not like). Fortunately reset fixed that. No password required for now. I also tested the camera and saw my surprised face on the monitor

I'll spend the rest of the time inserting the new servos into my Wall-E project. So much to do, so little time!

Thanks very much EzB team for getting this kit to me :)

EZ Robot V4's are being sprinkled around the world! What an exciting time in history we live in. :)

Nice design on the voltage regulator... nice and compact... I don't even think you guys need to hard wire the wires on the sensor side of the regulator... So maybe a basic 3 wire servo wire on the one side that plugs into the V4 board and on the output side a 3pin header row to plug in you various basic 3 wire sensors....

@Tony1952 - We are pretty excited to be able to use those stickers! Congrats!

Now that's not fair, I didn't get a sticker :(

Haha, Thanks :D

Haha an e-sticker!

LOL, thats funny.

I just fell off my chair laughing so hard my side hurts! :P

Thanks for the fun. I needed a good laugh just then. :)

;)

By the way Rich, to be clear you get the sticker not the girl... :P

Very true! The sticker though... that is all yours! I suppose I was made in Canada though... :D

Thumbs up to the last 10 posts. Great to see some frivolity and laughter in this forum. Sorry for creating Sticker Envy BTW mine is not for sale. You don't see many maple leaf stickers in my part of the world, they are just as rare as kangaroo stickers!