Welcome to Synthiam!

Program robots using technologies created from industry experts. EZ-Builder is our free-to-use robot programming software that makes features like vision recognition, navigation and artificial intelligence easy.
Get Started

Asked

EZ-B + ArduiNIX Nixie Tube Driver

Updated on 10/6/2013 - Go to end of thread for more...
--------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------

Introducing the ArduiNIX Nixie Tube Driver. I recently finishing putting this little piece of hardware together and am extremely impressed with everything from the PCB design to the online assembly instructions. There's even a tricked out R2 unit that helps with the soldering!

The ArduiNIX is a 4x20 multiplexed driver (4 Anodes/20 Cathodes) which essentially allows you to control up to 8 Nixie tubes or 80 neon bulbs (or some combination of the two). I haven't quite decided what I'm going to use it for yet but I was thinking that one of the openings on the front of the Omnibot shell would house a few Nixie tubes nicely...

Only thing I've done so far is connect it to the EZ-B and dial in the outputs at 170 volts. That's right kids, we're driving tubes here so we're dealing with potentially lethal voltages - notice the high voltage warnings on either side of the 4-pin Anode connector. So long as contact is momentary and you don't have a heart condition you should be fine, but you will get an adreniline rush for sure. I remember my grandfather telling me to only use one hand when working with LIVE tube cicuits. The last thing you want is for high voltage current to flow from one hand to the other, zapping your heart along the way. Well, zapping your brain isn't a very good idea either - trust me, that really hurts too...

I have yet to hook up any tubes but will update the post with more pics when I do...

User-inserted image

User-inserted image

User-inserted image

AI Support Bot
AI Support Bot
Synthiam
Greetings! I'm the support robot! I've searched other questions, tutorials and controls related to your question. Take a look at these links. They're all sorted by what I believe is the most relevant:
Hmmm, on second thought, I may want to relocate the 4-pin Anode connector to the underside of the ArduiNIX to make it a tad safer...
Quick test of a single IN-4 Nixie Tube driven by an ArduiNIX Nixe Tube Driver controlled by an EZ-B Robot Controller powered by a 7.4V EZ-Battery!

All Wired and Ready
User-inserted image

Flip the switch Leon!
User-inserted image

All Fired Up
User-inserted image

This is a pair of Russian IN-4 Nixie tubes mounted sideways in my Omnibot's eye sockets. I'm waiting on bare socket boards from KOSBO (thank you Konstantin!) to complete the initial design and add color-changing LED back-lighting for mood indication. Check out the video to see it in action...

User-inserted image

User-inserted image

User-inserted image

User-inserted image
Ok, I see how the eyes open and close. Very cool.

But, what is making the blue rings around the eyes? That is a very nice effect. It looks like a circle of LEDS. Is that what they are? and where do you get them? and Exactly what size are they around?

ultracool!
Just a quick eye test after replacing and rewiring the MiniM LED back-lights. An intermittent short in the old wiring harness ultimately got the first pair perished...

Running a short wake-up & sleep script coordinating the NL-7153 Nixie Tube eyes with the BlinkM MinM eye socket back-lighting...



Surgery and post-op pics:

User-inserted image

User-inserted image

User-inserted image

User-inserted image

User-inserted image
Netherlands
Oh how I have missed your creepy videos:D
Vanilla's now 3-layer brain has been successfully transplanted into his head! We still need to shorten and clean up his wiring a bit before making a video of the finished product...

For now, here are a few more surgery and post-op pics:

User-inserted image

User-inserted image

User-inserted image

User-inserted image

User-inserted image

User-inserted image

User-inserted image