3D Printable Robot Parts

Most Recent

Miscellaneous

6 X AA Battery Holder

6 X AA Battery Holder

This is a placeholder for the 6 x AA Battery Holder by EZ-Robot. This is not a 3D Printable part.
Adapter_Plate_Einhell_Battery

Adapter_Plate_Einhell_Battery

Adapter plate for the Einhell Power X battery change system for the Rover
Einhell_Battery_Pack

Einhell_Battery_Pack

Einhell battery pack
Extension Block

Extension Block

Very useful extension that is the same length of a Clip n Play Lever Servo. This allows you to extend an arm to get to...
Extension Cube

Extension Cube

The extension cube allows multiple EZ-Bits to be connected to a single location. If you wish to connect more than one...
EZ-B V4 Wifi Robot Controller

EZ-B V4 Wifi Robot Controller

The EZ-B v4 boasts 200mhz of 32-bit Processors (ARM Cortex M3 & Microchip PIC32) , 5 Volt Tolerant I/O, Energy Efficient...
Female Clip'n'play Adapter Plate

Female Clip'n'play Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for...
Interconnects

Interconnects

Interconnects
Iotiny

Iotiny

This is the IoTiny, which is a small robot controller by EZ-Robot. This part is not 3D printable, instead this is used...
Iphone 5 Holder

Iphone 5 Holder

This will hold an iPhone 5 or iPod Touch. There are two ez-clips to connect servos for gimbal x/y control. One clip on...
Iphone 6 Holder

Iphone 6 Holder

This will hold an iPhone 6 or iPhone 6s. There are two EZ-Clips to attach servos for X/Y Gimbal control. There is one...
Iphone 6 Plus Holder

Iphone 6 Plus Holder

This is a holder for an iPhone 6 Plus or iPhone 6s Plus. There are two EZ-Clip connectors to attach servos for X/Y...
JD's Microphone

JD's Microphone

The microphone used in the dancing JD videos where he sings You Haunt Me from the demo app. As seen in his famous...
Lego Female EZ-Clip

Lego Female EZ-Clip

This clip has a Lego attachment to connect Lego (tm) parts to your EZ-Robot. The EZ-Clip is a female.
Lego Male EZ-Clip

Lego Male EZ-Clip

This Lego adapters has a male EZ-Clip. Connect Lego parts to your EZ-Robot.
Lips

Lips

Lips for Rover
Male Clipnplay Adapter Plate

Male Clipnplay Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for...
Male Connector Plate

Male Connector Plate

Male connector plate. This plate was designed to connect the JD body to an object of your choice. This was designed for...
Minipc

Minipc

MiniPC for PC Dock
PC_Dock

PC_Dock

PC Dock for MiniPC
Rover Can/Bottle Holder

Rover Can/Bottle Holder

Add a can or bottle holder to the rover chassis
Speaker

Speaker

Speaker for Speaker Holder
Speakerholder

Speakerholder

Speaker Holder for Rover
Stepdownplate_Roli_Rover

Stepdownplate_Roli_Rover

Plate for StepDownConverter Rover Roli
Tripod Adapter Gopro / EZ

Tripod Adapter Gopro / EZ

A tripod adapter from GoPro to EZ
Ventilation_Grille_Front_Rover

Ventilation_Grille_Front_Rover

Ventilation grille front for Rover
Wedge

Wedge

My robot dont touch

Bodies - EZB v4

Crab

Crab

Crab- Avicenna
Dodecagon Body

Dodecagon Body

Begin your robot build with this versatile dodecagon dome shell as the main body. 13 female EZ-Bit connectors provide...
Hexapod Dome

Hexapod Dome

This is the dome which connects to the Hexapod Body. It covers the EZ-B and has a female EZ-Bit on the top - which we...
Humanoid Body

Humanoid Body

The Humanoid Body is a stable robot platform to begin building your own robot. It has enough internal space to house the...
Jd Waist Part

Jd Waist Part

3d servo waist part for jd
Power Shell

Power Shell

The Power Shell is a holder for your EZ-B v4 WiFi Robot Controller. The power shell enables use of your EZ-B v4 on the...
Rover Body

Rover Body

Roli is a very customizable planetary rover styled robot platform with 13 female EZ-Bit connections for additional...
Runa V1.0

Runa V1.0

Primera versión de Runa
Waist HDD Box

Waist HDD Box

waist hdd box with emblem model only

Sensors & Cameras

Developer Kit Camera

Developer Kit Camera

This is the camera for the developer kit - used as a resource to demonstrate where it would be installed. This is not a...
EZ-B V4 Camera

EZ-B V4 Camera

Give your EZ-Robot the gift of sight with crisp 640x480 resolution. The EZ-Robot Camera is capable of color tracking,...
Gopro Adapter

Gopro Adapter

This adapter will give your GoPro Camera case the power of ClipnPlay.
Hitachi Lidar And Realsense T265 Bracket

Hitachi Lidar And Realsense T265 Bracket

This is a bracket that holds a Hitachi Lidar and Intel Realsense T265 tracking sensor. The lidar is positioned that the...
Intel Realsense Double Bracket

Intel Realsense Double Bracket

This is 3d Printable bracket that holds two realsense cameras. The D465i and T265. Each of these two cameras have a...
RGB LED Block

RGB LED Block

This RGB LED Block includes 18 RGB LEDs. The LEDs can be sequenced using the EZ-Builders RGB Animator Control. Each LED...
Rpilidar A1 And Intel Realsense T265 Bracket

Rpilidar A1 And Intel Realsense T265 Bracket

This bracket holds a RPI Lidar A1 and Intel Realsense T265 tracking camera. The offset for the lidar robot skill will...
Stereocamera_Rig

Stereocamera_Rig

camera rig for 2 x Microsoft LifeCam HD-3000 Web Cams
Stereopi

Stereopi

StereoPi to ARC
Ultrasonic Distance Sensor

Ultrasonic Distance Sensor

This is a distance/range detection sensor which also includes our innovative low energy switching power supply. The...

Bodies - EZB v3

Heads

Bb-8 Head

Bb-8 Head

Im on a Star Wars kick, I made a BB-8 head for EZ-Robots with a male ez-bit clip. This looks extra neat on a Six robot.
Darth Jader Head

Darth Jader Head

The head used in ezrobots Darth Jader
Female Humanoid Head Witih Camera

Female Humanoid Head Witih Camera

Girls! Hey you have a girl playing with the robots but non of the Revolution bots are geared towards girls. So i got to...
Humanoid Head With Camera

Humanoid Head With Camera

Add a Humanoid Head to your EZ-Robot so it can recognize its surrounding and display emotions. Includes a built in...
Inmoov Head

Inmoov Head

Used as image for model
Jason Friday 13Th Face Mask

Jason Friday 13Th Face Mask

Since it is Friday the 13th, (ch ch ch ch, ah ah ah) I made JD a mask to go over the standard face with an elastic...
NAO Head

NAO Head

I am inspired by the JD Robot on thingiverse. I really want a Nao Robot so badly, but do not have money for one. Now I...
Six BB-8 Six Hexapod Body Cover

Six BB-8 Six Hexapod Body Cover

This BB-8 Hexapod body coverts your six into a hexapod BB-8. Combine this with the BB-8 head as well.

Hands & Grippers

Servos

Continuous Rotation Servo

Continuous Rotation Servo

A continuous rotation servo will rotate 360 degrees, rather than the 180 degrees of a regular servo. These servos are...
Continuous Servo With Wheel

Continuous Servo With Wheel

This is a placeholder for the EZ-Robot Continuous Rotation Servo with the wheel from the developer kit attached. This is...
JD Hip Assembly

JD Hip Assembly

This is a hip assembly that contains two servos for JD.
Lever Servo - 0 Degrees

Lever Servo - 0 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Lever Servo - 135 Degrees

Lever Servo - 135 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Lever Servo - 180 Degrees

Lever Servo - 180 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Lever Servo - 45 Degrees

Lever Servo - 45 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Lever Servo - 90 Degrees

Lever Servo - 90 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Rotation Servo

Rotation Servo

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay connection that rotates 180 degrees. The metal internals...

Feet

Bodies - IoTiny

Miscellaneous
Wedge

Wedge

My robot dont touch
Bodies - EZB v4
Crab

Crab

Crab- Avicenna
Sensors & Cameras
Stereopi

Stereopi

StereoPi to ARC
Miscellaneous
Speakerholder

Speakerholder

Speaker Holder for Rover
Miscellaneous
Speaker

Speaker

Speaker for Speaker Holder
Miscellaneous
PC_Dock

PC_Dock

PC Dock for MiniPC
Miscellaneous
Minipc

Minipc

MiniPC for PC Dock
Miscellaneous
Lips

Lips

Lips for Rover
Miscellaneous
Tripod Adapter Gopro / EZ

Tripod Adapter Gopro / EZ

A tripod adapter from GoPro to EZ
Sensors & Cameras
Stereocamera_Rig

Stereocamera_Rig

camera rig for 2 x Microsoft LifeCam HD-3000 Web Cams
Miscellaneous
Stepdownplate_Roli_Rover

Stepdownplate_Roli_Rover

Plate for StepDownConverter Rover Roli
Miscellaneous
Einhell_Battery_Pack

Einhell_Battery_Pack

Einhell battery pack
Miscellaneous
Adapter_Plate_Einhell_Battery

Adapter_Plate_Einhell_Battery

Adapter plate for the Einhell Power X battery change system for the Rover
Miscellaneous
Ventilation_Grille_Front_Rover

Ventilation_Grille_Front_Rover

Ventilation grille front for Rover
Miscellaneous
Interconnects

Interconnects

Interconnects
Sensors & Cameras
Rpilidar A1 And Intel Realsense T265 Bracket

Rpilidar A1 And Intel Realsense T265 Bracket

This bracket holds a RPI Lidar A1 and Intel Realsense T265 tracking camera. The offset for the lidar robot skill will...
Sensors & Cameras
Hitachi Lidar And Realsense T265 Bracket

Hitachi Lidar And Realsense T265 Bracket

This is a bracket that holds a Hitachi Lidar and Intel Realsense T265 tracking sensor. The lidar is positioned that the...
Bodies - EZB v3
Pi Compatible SBC Holder

Pi Compatible SBC Holder

This is a base holder for a Pi compatible-formfactor SBC, such as the Rock Pi/x and Up Board. For SBCs, such as the Rock...
Sensors & Cameras
Intel Realsense Double Bracket

Intel Realsense Double Bracket

This is 3d Printable bracket that holds two realsense cameras. The D465i and T265. Each of these two cameras have a...
Hands & Grippers
Left Spring Hand

Left Spring Hand

3d left spring hand
Hands & Grippers
Righ Spring Hand

Righ Spring Hand

3d print hand right
Hands & Grippers
Right Fist

Right Fist

3 d print right fist
Hands & Grippers
Left Fist

Left Fist

3d print left fist
Hands & Grippers
Bioloid Hand Complete

Bioloid Hand Complete

bioloid hand complete
Bodies - EZB v4
Waist HDD Box

Waist HDD Box

waist hdd box with emblem model only
Bodies - EZB v4
Jd Waist Part

Jd Waist Part

3d servo waist part for jd
Heads
Inmoov Head

Inmoov Head

Used as image for model
Bodies - EZB v4
Runa V1.0

Runa V1.0

Primera versión de Runa
Bodies - IoTiny
Farscape DRD Bottom Chassis

Farscape DRD Bottom Chassis

This is the DRD bottom chassis from the DRD robots inspired by the TV Series Farscape. This robot chassis is designed to...
Bodies - IoTiny
Farscape DRD Top Body

Farscape DRD Top Body

This is the DRD top body inspired from the DRD robots inspired by the TV Series Farscape. This robot body is designed to...
Bodies - IoTiny
Farscape DRD Servo Clip

Farscape DRD Servo Clip

This clip holds the servos in place for the DRD robot inspired by the Farscape TV Series. This connects to the DRD...
Miscellaneous
Iotiny

Iotiny

This is the IoTiny, which is a small robot controller by EZ-Robot. This part is not 3D printable, instead this is used...
Sensors & Cameras
Developer Kit Camera

Developer Kit Camera

This is the camera for the developer kit - used as a resource to demonstrate where it would be installed. This is not a...
Miscellaneous
6 X AA Battery Holder

6 X AA Battery Holder

This is a placeholder for the 6 x AA Battery Holder by EZ-Robot. This is not a 3D Printable part.
Servos
Continuous Servo With Wheel

Continuous Servo With Wheel

This is a placeholder for the EZ-Robot Continuous Rotation Servo with the wheel from the developer kit attached. This is...
Heads
Darth Jader Head

Darth Jader Head

The head used in ezrobots Darth Jader
Bodies - EZB v4
Dodecagon Body

Dodecagon Body

Begin your robot build with this versatile dodecagon dome shell as the main body. 13 female EZ-Bit connectors provide...
Hands & Grippers
3 Finger Gripper

3 Finger Gripper

Took me a few tweaks but here is my pretty easy and simple design for a 3 finger gripper.
Heads
Six BB-8 Six Hexapod Body Cover

Six BB-8 Six Hexapod Body Cover

This BB-8 Hexapod body coverts your six into a hexapod BB-8. Combine this with the BB-8 head as well.
Heads
Bb-8 Head

Bb-8 Head

Im on a Star Wars kick, I made a BB-8 head for EZ-Robots with a male ez-bit clip. This looks extra neat on a Six robot.
Heads
Jason Friday 13Th Face Mask

Jason Friday 13Th Face Mask

Since it is Friday the 13th, (ch ch ch ch, ah ah ah) I made JD a mask to go over the standard face with an elastic...
Miscellaneous
Female Clip'n'play Adapter Plate

Female Clip'n'play Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for...
Miscellaneous
Male Clipnplay Adapter Plate

Male Clipnplay Adapter Plate

Add this adapter plate to your custom robot to start using EZ-Bits with ClipnPlay Technology. This adapter has holes for...
Miscellaneous
JD's Microphone

JD's Microphone

The microphone used in the dancing JD videos where he sings You Haunt Me from the demo app. As seen in his famous...
Miscellaneous
Lego Male EZ-Clip

Lego Male EZ-Clip

This Lego adapters has a male EZ-Clip. Connect Lego parts to your EZ-Robot.
Miscellaneous
Lego Female EZ-Clip

Lego Female EZ-Clip

This clip has a Lego attachment to connect Lego (tm) parts to your EZ-Robot. The EZ-Clip is a female.
Miscellaneous
Iphone 6 Holder

Iphone 6 Holder

This will hold an iPhone 6 or iPhone 6s. There are two EZ-Clips to attach servos for X/Y Gimbal control. There is one...
Miscellaneous
Iphone 5 Holder

Iphone 5 Holder

This will hold an iPhone 5 or iPod Touch. There are two ez-clips to connect servos for gimbal x/y control. One clip on...
Miscellaneous
Iphone 6 Plus Holder

Iphone 6 Plus Holder

This is a holder for an iPhone 6 Plus or iPhone 6s Plus. There are two EZ-Clip connectors to attach servos for X/Y...
Servos
JD Hip Assembly

JD Hip Assembly

This is a hip assembly that contains two servos for JD.
Heads
NAO Head

NAO Head

I am inspired by the JD Robot on thingiverse. I really want a Nao Robot so badly, but do not have money for one. Now I...
Hands & Grippers
21/06/2015 02:36:12

21/06/2015 02:36:12

top of robot arm
Sensors & Cameras
Gopro Adapter

Gopro Adapter

This adapter will give your GoPro Camera case the power of ClipnPlay.
Miscellaneous
Male Connector Plate

Male Connector Plate

Male connector plate. This plate was designed to connect the JD body to an object of your choice. This was designed for...
Bodies - EZB v4
Humanoid Body

Humanoid Body

The Humanoid Body is a stable robot platform to begin building your own robot. It has enough internal space to house the...
Servos
Continuous Rotation Servo

Continuous Rotation Servo

A continuous rotation servo will rotate 360 degrees, rather than the 180 degrees of a regular servo. These servos are...
Bodies - EZB v4
Rover Body

Rover Body

Roli is a very customizable planetary rover styled robot platform with 13 female EZ-Bit connections for additional...
Sensors & Cameras
EZ-B V4 Camera

EZ-B V4 Camera

Give your EZ-Robot the gift of sight with crisp 640x480 resolution. The EZ-Robot Camera is capable of color tracking,...
Feet
2014-10-23 1:08:15 PM

2014-10-23 1:08:15 PM

added toes, snow flakes and a funny star
Heads
Female Humanoid Head Witih Camera

Female Humanoid Head Witih Camera

Girls! Hey you have a girl playing with the robots but non of the Revolution bots are geared towards girls. So i got to...
Bodies - EZB v3
EZ-Case

EZ-Case

This is a case for the EZ-B v3 that also holds a fan. For detailed instructions on how to assemble it, visit:...
Servos
Rotation Servo

Rotation Servo

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay connection that rotates 180 degrees. The metal internals...
Bodies - EZB v3
Six Body - EZB V3

Six Body - EZB V3

Six body for the EZB v3 board. Original files from EZ-Robot.com.
Bodies - EZB v3
Six Body - EZB V3

Six Body - EZB V3

Six body for the EZB v3 board. Original files from EZ-Robot.com.
Bodies - EZB v3
JD Body - EZB V3

JD Body - EZB V3

JD body for the EZB v3 board. Original files from EZ-Robot.com
Bodies - EZB v4
Hexapod Dome

Hexapod Dome

This is the dome which connects to the Hexapod Body. It covers the EZ-B and has a female EZ-Bit on the top - which we...
Hands & Grippers
Servo Gripper

Servo Gripper

The Servo Gripper can be added to any EZ-Bit connector allowing it to grab objects. The Servo Gripper includes a strong...
Sensors & Cameras
Ultrasonic Distance Sensor

Ultrasonic Distance Sensor

This is a distance/range detection sensor which also includes our innovative low energy switching power supply. The...
Sensors & Cameras
RGB LED Block

RGB LED Block

This RGB LED Block includes 18 RGB LEDs. The LEDs can be sequenced using the EZ-Builders RGB Animator Control. Each LED...
Miscellaneous
Extension Cube

Extension Cube

The extension cube allows multiple EZ-Bits to be connected to a single location. If you wish to connect more than one...
Miscellaneous
EZ-B V4 Wifi Robot Controller

EZ-B V4 Wifi Robot Controller

The EZ-B v4 boasts 200mhz of 32-bit Processors (ARM Cortex M3 & Microchip PIC32) , 5 Volt Tolerant I/O, Energy Efficient...
Miscellaneous
Extension Block

Extension Block

Very useful extension that is the same length of a Clip n Play Lever Servo. This allows you to extend an arm to get to...
Miscellaneous
Rover Can/Bottle Holder

Rover Can/Bottle Holder

Add a can or bottle holder to the rover chassis
Servos
Lever Servo - 45 Degrees

Lever Servo - 45 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Servos
Lever Servo - 90 Degrees

Lever Servo - 90 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Servos
Lever Servo - 0 Degrees

Lever Servo - 0 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Servos
Lever Servo - 180 Degrees

Lever Servo - 180 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Servos
Lever Servo - 135 Degrees

Lever Servo - 135 Degrees

This is a digital heavy duty 15 kg/cm servo with a ClipnPlay lever that rotates 180 degrees. The metal internals will...
Heads
Humanoid Head With Camera

Humanoid Head With Camera

Add a Humanoid Head to your EZ-Robot so it can recognize its surrounding and display emotions. Includes a built in...
Feet
Humanoid Left Foot Assembly

Humanoid Left Foot Assembly

Add a unique method of movement with humanoid legs. Simply attach this Humanoid foot assembly to any female Clipnplay...
Feet
Humanoid Right Foot Assembly

Humanoid Right Foot Assembly

Add a unique method of movement with humanoid legs. Simply attach this Humanoid foot assembly to any female Clipnplay...
Feet
Hexapod Foot

Hexapod Foot

The Hexapod Foot attaches to a female ClipnPlay connector of a servo. Use this foot on your Hexapod, or be creative and...
Bodies - EZB v4
Power Shell

Power Shell

The Power Shell is a holder for your EZ-B v4 WiFi Robot Controller. The power shell enables use of your EZ-B v4 on the...